Straddle legs are the reason most stackers cannot approach a closed-bottom pallet, a stillage or a machine bed. This one is counterbalanced instead, so it drives right up to the load with nothing underneath — which opens up work that a straddle stacker simply cannot do.
250kg to 1200mm with semi-electric lift and a built-in charger. Light-duty by design: it is meant for boxed stock, components and light stillages rather than full pallets, which is what keeps it small enough to work indoors in congested areas.
Key Features
- Counterbalanced design — no straddle legs — approaches closed-bottom pallets and stillages
- Semi-electric lift — powered raising with a built-in charger, manual travel
- Lightweight and ergonomic — designed for indoor use in confined areas
- Footbrake — holds position during loading and unloading
- Adjustable fork width — 215-550mm to suit different load sizes
Technical Specifications
| Specification |
Value |
| Capacity |
250kg |
| Maximum fork height |
1200mm |
| Minimum fork height |
60mm |
| Fork size |
600 x 100mm |
| Adjustable fork width |
215-550mm |
| Motor |
DC 12V / 800W |
| Battery |
DC 12V / 60Ah |
| Overall dimensions |
1500 x 720 x 1440mm |
| Net weight |
225kg |
Built-in charger — plug into any standard socket.
CE Marked | 12-Month On-Site Warranty
Supplied by Warrior, part of the Handling Equipment UK range. Manufactured to CE / UKCA standards and supplied with a declaration of conformity where applicable. Lift tables are issued with a test certificate to EN 1570 on request.
Warranty
Every Warrior product is supplied with a full 12-month on-site warranty covering parts and labour at no additional cost. Cover starts from the date of delivery and repairs are carried out at your premises rather than under a return-to-base arrangement. A comprehensive UK spare parts stock is held for every model in the range, and servicing, repair and statutory inspection can be arranged through WOLFF Onsite.
Suitable Applications
Machine loading, stillage handling, engineering workshops, laboratories and stores areas where the load sits flush to a wall or on a closed-bottom base.
How to Use
- Position the stacker square to the load and apply the footbrake.
- Set the fork width to suit the load.
- Enter the load with the forks fully home.
- Raise using the powered control to the required height.
- Lower to transport height before moving.
Warning: 250kg is the rated capacity at the standard load centre. Loads carried further out on the forks reduce the safe capacity — do not overhang.
Safety Information
- Check the mast is clear and the chains are correctly seated before lifting.
- Never lift a load that exceeds the rated capacity or extends beyond the fork tips.
- Do not travel with the forks raised above transport height.
- Keep all personnel clear of the mast and load during raising and lowering.
- Withdraw from service immediately if a chain shows wear, stretch or damage.
- Charge only in a well-ventilated area.
- Isolate the battery before maintenance.
Inspection and Maintenance
Inspect the lift chains weekly for stretch, wear and correct tension, and check the mast rollers and fork carriage for free movement. Grease the mast channels periodically. Stackers used to lift loads clear of the ground should be included in your documented inspection regime.
Frequently Asked Questions
Q: Why choose counterbalanced over straddle?
Because it can reach loads a straddle stacker cannot — closed-bottom pallets, stillages, machine beds and anything sitting flush against a wall.
Q: Why is the capacity only 250kg?
A counterbalanced design carries the load ahead of the wheels, which needs ballast to offset. Keeping the capacity light keeps the machine small enough to work indoors.
Q: Is travel powered?
No — lift is powered, travel is manual. That keeps the unit manoeuvrable and avoids the cost of a fully powered machine.
Q: What is the charging arrangement?
A charger is built in. Plug into any standard 240V socket.
Q: Can it lift a full pallet?
Only if the pallet weighs under 250kg. For full pallets a 1000kg stacker is the correct tool.
