Conquip Kerb Stone Handles

Adjustable manual gripping handles for efficient lifting, transport, and placement of concrete kerbs, edge blocks, and natural stone kerbs. Galvanised finish, replaceable rubber grips. WLL 30kg per set.

Conquip Kerb Stone Handles, also known as kerb lifting handles, are adjustable gripping handles used as an efficient method for manually lifting, transporting, and placing concrete kerbs, edge blocks, and natural stone kerbs. The simple, lightweight design (just 7.5kg) and adjustable grip range make them the standard hand tool for kerb-laying gangs working on smaller kerbstone sizes. The handles can be operated by a single operator on lighter kerbs, but Conquip recommend using two sets to move one load -- with an operator on each set of handles -- for safer, more controlled placement. As a manual-only tool, the handles support a sustainability-focused approach to kerb laying: less machinery on site means lower CO2 emissions, less fuel cost, and reduced plant scheduling complexity. The galvanised finish provides corrosion resistance and weather protection for tools that live in the back of vans, while replaceable rubber grips allow worn parts to be swapped quickly without retiring the whole tool.

Technical Specifications

Key Features

• Adjustable grip range (220-300mm) suits a variety of kerb, edge block, and natural stone sizes
• Lightweight at just 7.5kg -- easy to carry between work areas
• Galvanised finish increases durability and provides weather protection
• Replaceable rubber grips reduce long-term tool replacement costs
• Rubber-coated handles for operator comfort during repetitive use
• Manual lifting reduces machinery on site, supporting lower CO2 emissions and fuel costs
• Compatible with concrete kerbs, edge blocks, and natural stone kerbs
• Conquip recommend two sets per load -- one operator per set -- for safer two-person manual lifting

Suitable Applications

Kerb Stone Handles are the standard hand tool for kerb-laying gangs handling smaller kerb sizes -- standard PCC kerbs, edge blocks, channel blocks, and natural stone kerbs in domestic, commercial, and minor highways work. They are particularly valuable for projects where minimising plant on site is a priority -- city-centre work, restricted access projects, sustainability-focused contracts, and fit-out work where machinery cannot be brought close to the laying position. For larger HB kerbs and slabs, see the Kerb Gripper. For mechanical placement of kerbs, steps, and pre-formed sections, see the Kerb Lifter.

How to Use

1. Carry out a pre-use inspection: handle integrity, rubber grips, adjustment mechanism
2. Adjust the grip range to suit the kerb or edge block being lifted (220-300mm)
3. Position the handles on either side of the kerb so the rubber grips engage
4. For two-set operation: place a second set on the opposite end of the kerb, with one operator per set
5. Operators lift in unison using a straight-back, bent-knee technique
6. Walk the kerb to the laying position at a controlled speed
7. Lower the kerb gently into position
8. Release the handles by relaxing the grip and lifting the handles clear

Warning: Working Load Limit of 30kg per set. For two-set use, the combined WLL is 60kg, but the maximum single-kerb weight should still be assessed against safe manual handling guidance (HSE recommends 25kg per person for symmetric, low-frequency lifts). Wear cut-resistant gloves and steel-toe boots. Do not use this tool for crane or machine lifting under any circumstances.

Safety Information

• Working Load Limit of 30kg per set must not be exceeded
• For two-set operation, ensure both operators are positioned correctly and lift in unison
• Manual handling guidance (HSE L23) should be followed -- 25kg per person for symmetric, low-frequency lifts
• Pre-use inspection required before every shift -- check handle integrity, rubber grips, and adjustment mechanism
• Rubber grips must be intact and free from oil, grease, or damage; replace worn grips before use
• Handles with bent frames, damaged adjustment mechanisms, or compromised welds must be removed from service immediately
• Wear cut-resistant gloves and steel-toe boots when handling kerbs
• Do NOT use these handles for crane, excavator, or any machine lifting -- they are designed for manual use only
• Use a kerb lifting trolley or kerb dolly for transporting multiple kerbs over distance

Frequently Asked Questions