
The Camlok TRU round stock grab lifts tubes, pipes, bar and rolls by crane, gripping them across the diameter. It spans the widest range in the Camlok grab line, from 100 kg up to 4,000 kg WLL, for stock from 35 mm up to 600 mm diameter.
Every size comes with standard jaws for general stock or rubber-lined jaws for finished material that must not be marked. A locking pawl holds the grab open while it is positioned; the shackle is not supplied.
Choose the size whose jaw capacity covers the outside diameter of your stock, then check the weight is within its WLL.
| Model | WLL | Jaw capacity (diameter) | Best suited to |
|---|---|---|---|
| TRU100 | 100 kg | 50-150 mm | Light tube and bar lengths |
| TRU500 | 500 kg | 35-200 mm | Bar, small pipe and shafts |
| TRU1000 | 1,000 kg | 35-200 mm | Heavier bar and solid round of the same sizes |
| TRU1500 | 1,500 kg | 80-300 mm | Medium pipe, tube and rolls |
| TRU3000 | 3,000 kg | 80-300 mm | Heavy-wall pipe and solid round to 300 mm |
| TRU4000 | 4,000 kg | 200-600 mm | Large pipe and heavy rolls |
Standard or lined? Standard jaws suit general stock. Lined jaws avoid marking finished or coated material, but reduce jaw capacity by about 4 mm and need dry, clean surfaces free of oil and grease.
You may also need: a suitably rated shackle (not supplied).
Choose a size above to see its specifications.
| Model | WLL | Jaw capacity | Weight |
|---|---|---|---|
| TRU100 | 100 kg | 50-150 mm | 3.9 kg |
| TRU500 | 500 kg | 35-200 mm | 13.6 kg |
| TRU1000 | 1,000 kg | 35-200 mm | 13.6 kg |
| TRU1500 | 1,500 kg | 80-300 mm | 27.0 kg |
| TRU3000 | 3,000 kg | 80-300 mm | 49.0 kg |
| TRU4000 | 4,000 kg | 200-600 mm | 208.0 kg |
Always read the manufacturer’s instructions before use.
A: Standard jaws can. Choose the lined version for finished or coated material, and keep the surface dry and free of oil and grease.
A: Slightly. The lining takes up about 4 mm of jaw capacity, so check stock near the top of the range.
A: No, order a suitably rated shackle separately.