The Invicta GR-AP range of Access Platforms provides a safe, HSE PM28-compliant working environment for maintenance and inspection tasks. A hinged back guard eases transportation and storage, with safety harness attachment rings, a self-draining non-slip floor and zinc-plated heel pins for secure fork attachment delivering reliable two-person elevated access. Available in 1500mm and 1800mm platform lengths; manufactured in Leeds by Invicta Forks & Attachments.
Key Features
- Hinged back guard — folds for easy transportation and storage
- Safety harness attachment rings — secure anchor points for personal fall protection
- Self-draining non-slip floor — safe footing in wet conditions
- Internal handles — secure handhold for operatives during elevation
- Stilt pressings — elevates fork pockets for improved fork engagement
- Zinc plated heel pins — secure attachment to the forklift truck
- Manufactured to HSE PM28 4th Edition — full compliance with health and safety guidelines
- Painted bright orange for safety — high-visibility finish for on-site safety compliance
Technical Specifications
| Model |
Access Type |
Persons |
Platform L×W×H (mm) |
Capacity (kg) |
Weight (kg) |
| GR-AP-1 |
Lift-up Bar |
2 |
1500 × 950 × 2120 |
250 |
141 |
| GR-AP-2 |
Lift-up Bar |
2 |
1800 × 950 × 2120 |
250 |
155 |
Maximum fork section: 150 × 50mm at 785mm centres.
UK Manufactured | LOLER Compliant
This product is designed and manufactured in the UK by Invicta Forks & Attachments, the UK's largest mechanical forklift attachment manufacturer, based in Leeds. Where applicable, this product is supplied with a test certificate and EC Declaration of Conformity. LOLER 1998 thorough examinations are required every 6 months by a competent person after initial certification.
More About This Product
The Invicta GR-AP range of Access Platforms provides a safe, HSE PM28-compliant working environment for maintenance and inspection tasks. With a hinged back guard for easy transportation and storage, safety harness attachment rings, self-draining non-slip floor and zinc-plated heel pins for secure fork attachment, the GR-AP delivers reliable performance for two-person elevated access. Available in 1500mm and 1800mm platform lengths. Manufactured in Leeds by Invicta Forks & Attachments.
Suitable Applications
Suited to maintenance, inspection and repair work across construction sites, warehouses and industrial facilities. Common uses include building maintenance, stock checking, signage installation and overhead equipment access.
Inspection and Maintenance
Inspect regularly with particular attention to all weld points, lifting eyes, pivot points and any signs of deformation or corrosion. Certified for six months from manufacture — thorough examination under LOLER 1998 required every 6 months.
