Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Hoists and Trolleys

Pneumatic Chain Hoists

Air powered chain hoists that need no electrical supply, for continuous duty and hazardous areas. The Yale CPA range comes in standard and ATEX versions, with top hook, geared or air-driven trolley options; see all our ATEX lifting equipment. Short-term job? Hire an air hoist by the week.

Products
81
Brands
Red Rooster, JD Neuhaus
Certification
✓ UKCA & CE
Products 81
Brands Red Rooster, JD Neuhaus
Certification ✓ UKCA & CE
Buying guide

Pneumatic Chain Hoists

When an air hoist is the right choice

A pneumatic chain hoist, or air hoist, runs on compressed air instead of mains power. The Yale CPA hoists on this page use a rotating piston air motor rated for 100% duty with an unlimited number of starts, so they keep working through long shifts and constant stop-start positioning where an electric hoist would need rest periods. A spring-pressure or automatic disc brake holds the load if the air supply fails. Yale states the CPA is unaffected by contamination, humidity and aggressive media, and lists foundries, shipyards, refineries, offshore and chemical plants among its uses.

The three CPA options on this page
Product Capacity Suspension and travel Choose it for
CPA with top hook 125kg to 980kg Hangs from an anchor point, beam clamp or separate trolley Fixed lifting points and workstation lifts
CPA with geared trolley (VTG) 2,000kg to 10,000kg Integrated trolley, traversed by its own hand chain Heavy loads on a runway beam where traverse is occasional
CPA with air-driven trolley (VFT) 2,000kg to 10,000kg Integrated trolley with its own air motor Lift, lower and traverse from one pendant

The top hook model belongs to Yale's compact CPA-mini range. The 2 to 10 tonne models use a 5-pocket load sheave in case-hardened steel and an oil-bath planetary gearbox. Up to 3,000kg they run on a single chain fall, which keeps the overall height low under a beam. For a hook-mounted hoist that needs to travel, add a unit from our trolleys and trolley clamps range.

Air supply

Check your compressed air system before you order. Yale quotes these working pressures:

  • CPA 2,000kg to 10,000kg: 4 to 6 bar.
  • CPA-mini 125kg to 980kg: 5 to 7 bar for the standard version, 6 bar for the ATEX version.

The compressor and air line must hold that pressure at the flow the hoist draws when lifting its rated load. Yale offers a maintenance unit with pressure regulator, pressure gauge and lubricator for the supply line, plus a mobile version. Fit one unless your line already delivers regulated, lubricated air.

ATEX zones

The air motor has no electrical ignition source, but only an ATEX-certified hoist may be used in an explosive atmosphere. Yale builds the CPA ATEX in graded protection levels: copper-coated hooks from the MEDIUM design and a stainless steel load chain at HIGH. Match the protection level to your site's zone classification and ask us to confirm the Ex marking for your zone before you order. The top hook listing here is the standard CPA-mini; an ATEX version is available on request. Our ATEX pneumatic chain hoists page groups the hazardous-area models.

Controls, options and LOLER

The 2 to 10 tonne CPA hoists use a 2 or 4 button pendant with emergency stop, with rope control as an option. The CPA-mini has upper and lower hook limit switches as standard. Yale options include a hoist limit switch, chain container and stainless steel load chain. If you have no compressed air on site, our electric chain hoists are the alternative for powered lifting.

An air hoist is lifting equipment under LOLER. It needs a thorough examination at least every 12 months unless a written examination scheme sets other intervals. A trolley hoist assembled on site needs examining after installation and before first use.

Common questions
What is the difference between an air hoist and an electric hoist?

An air hoist runs on compressed air and is rated for 100% duty with unlimited starts, so it suits continuous work and hazardous areas. An electric hoist needs a mains supply and has a rated duty cycle.

What air pressure does a pneumatic chain hoist need?

Yale quotes 4 to 6 bar for the CPA 2 to 10 tonne hoists and 5 to 7 bar for the standard CPA-mini, or 6 bar for the CPA-mini ATEX. The supply must hold that pressure while the hoist lifts its rated load.

Can an air chain hoist be used in an ATEX zone?

Yes, if it is an ATEX version matched to your zone. Yale builds the CPA ATEX in graded protection levels, with copper-coated hooks and stainless steel load chain at the higher levels.

What happens if the air supply fails during a lift?

The brake holds the load. The Yale CPA uses a spring-pressure brake that applies when air pressure is lost.

Do I need a geared or an air-driven trolley?

A geared trolley is traversed by its own hand chain. An air-driven trolley has its own air motor, so one pendant controls lift, lower and travel.

How often does a pneumatic hoist need a LOLER inspection?

At least every 12 months, unless a written examination scheme sets a different interval. Slings and shackles used with it need examining every 6 months.

Which brands do you stock for Pneumatic Chain Hoists?

We supply JD Neuhaus and Red Rooster. Ranges vary, so check the brand page for the full listing.

What else is in Hoists and Trolleys?