Yale Riggers Harness CMHYP70 Five Point Full Body Harness

Model CMHYP70 | Five Point Fall Arrest, Work Positioning and Rescue | Riggers Specification | EN 361 and EN 358 Compliant | CMCO Group Manufacture

The Yale CMHYP70 Riggers Harness is the top-specification harness in the Yale range, built for riggers, scaffolders, structural steel workers and trades combining fall arrest, work positioning, suspension and rescue in a single working day. Five certified attachment points — front, rear, two side and a chest sternal D-ring — join an integrated padded work positioning belt, padded shoulder and leg straps, and accessory loops for tools. Manufactured by Columbus McKinnon under the Yale brand, supplied with test certificate and operating manual.

Key Features

• Five certified D-ring attachment points — front, rear, two side, and sternal — covers every fall arrest, work positioning, and rigging scenario
• Padded shoulder and leg straps — comfort padding for extended use during long working days at height
• Integrated padded work positioning belt — EN 358 compliant, with comfort padding for extended hands-free working
• Tool attachment loops — carry rigging tools, spanners, and small equipment on the harness for hands-free access
• Quick connect buckles on chest and legs — fast secure donning, audible click confirmation
• Riggers specification — designed specifically for trades that combine fall arrest, work positioning, and rigging activities
• Premium build quality — the top harness in the Yale range, suitable for daily heavy professional use

Technical Specifications

Premium riggers specification with five D-rings, padded shoulder and leg straps, integrated work positioning belt, and tool attachment loops.

More About This Product

The Yale CMHYP70 Riggers Harness is the top-specification harness in the Yale range, designed for riggers, scaffolders, structural steel workers, and trades that combine fall arrest, work positioning, suspension, and rescue scenarios in a single working day. Five certified attachment points — front, rear, two side, and a chest sternal D-ring — combined with an integrated padded work positioning belt, padded shoulder and leg straps, and accessory loops for tool attachment, make the CMHYP70 the premium choice for daily professional use at height. Manufactured by Columbus McKinnon under the Yale lifting brand, supplied with a manufacturer's test certificate and operating manual.

Suitable Applications

The CMHYP70 is the recommended harness for riggers, scaffolders, structural steel erectors, telecoms tower riggers, wind turbine technicians, and any trade where the user spends long days at height and switches between fall arrest, work positioning, ladder climbing, and rigging tasks. Where rescue retrieval is also required, see the Yale CMHYP10R Rescue Harness.

How to Fit and Use the Riggers Harness

1. Carry out a pre-use visual and tactile inspection — webbing, stitching, all buckles, all five D-rings, and the work positioning belt.
2. Hold the harness, untangle any twisted straps, and orient the work positioning belt at the waist.
3. Place the harness on like a jacket. Rear D-ring centres between the shoulder blades.
4. Fasten the quick connect chest buckle and adjust to a snug fit. The front and sternal D-rings should sit correctly once adjusted.
5. Fasten and adjust both quick connect leg buckles.
6. Position the work positioning belt around the waist, fasten and adjust.
7. Adjust the shoulder straps so all five D-rings sit in their correct positions.
8. Connect to the appropriate D-ring for the working task. Use tool attachment loops only for the tools they are rated for — never as load-bearing attachment points.

Warning:
Side D-rings and the sternal D-ring are for work positioning and rigging connection only — never use as fall arrest attachment. Tool attachment loops are not load-bearing. Fall arrest must use the front or rear D-ring. Plan rigging tasks carefully — the harness is one element of a wider rigging and lifting plan.

Safety Information

• Read and understand the manufacturer's operating manual before first use.
• Carry out a pre-use visual and tactile inspection before every use, checking all webbing, stitching, buckles, and D-rings.
• Withdraw the harness from service immediately if any damage, fraying, cuts, burns, or distorted hardware is found.
• Always attach to a certified anchor point rated to a minimum of 12 kN (1200 kg).
• Never use a harness that has arrested a fall — it must be removed from service and inspected by a competent person before re-issue.
• Ensure the harness is correctly sized and adjusted to the user before each use.
• Train all users in the correct fitting, inspection, and use of the harness before authorising use at height.
• Side D-rings are for work positioning only — never use as fall arrest attachment.
• Tool attachment loops are not rated as load-bearing attachment points.

Inspection and Maintenance

Inspect the harness visually and by hand before each use, paying particular attention to webbing for cuts, fraying, burns, or chemical damage, stitching for breaks or pulled threads, buckles and adjusters for distortion or damage, and D-rings for cracks, wear, or deformation. Clean using warm water and a mild detergent only — do not use solvents. Air-dry away from direct heat. Store in a clean, dry place away from direct sunlight, sharp objects, and chemicals. Under the Work at Height Regulations 2005 and PPE Regulations, a thorough examination must be carried out by a competent person at least every 6 months, with records kept. The maximum service life of a height safety harness is typically 10 years from date of first use, subject to inspection — refer to the manufacturer's manual for the specific service life of your model.

Downloads

• Yale Height Safety Brochure (PDF)

Frequently Asked Questions