Camlok CLB & CLT Container Lifting Lugs

40,000kg to 56,000kg WLL | ISO Container Lifting Attachments | CLB Bottom-Mount Lateral / CLT Top-Mount | Sold in Sets of 4 | CE Marked

The Camlok CLB and CLT container lifting lugs are flexible attachment points for the transport of ISO shipping containers by crane. The CLB mounts laterally at the bottom fixing hole of the container with a spring-loaded bolt preventing accidental release, while the CLT mounts to the top corner casting — both designed for 4-point lifts and supplied in sets of 4 pieces. Manufactured to the heavy-duty standards required for container handling at ports, depots, construction sites and offshore installations.

Key Features

• Two capacity ratings — 40,000 kg (N53508014) and 56,000 kg (N53508016) WLL per set of 4 lugs, covering the full range of ISO container weights.
• Spring-loaded bolt on CLB — prevents accidental release once the lug is engaged in the container's bottom fixing hole.
• Top-mount CLT variant — fits the top corner casting of an ISO container for crane attachment from above.
• Heavy-duty forged steel — designed for repeated port, depot and construction-site container lifts.
• Supplied in sets of 4 — one lug per container corner, ready for 4-point lifting.

Technical Specifications

Suitable Applications

Container lifting at ports, depots, container yards, construction sites, oil and gas installations, and modular building sites. Typical uses include loading and unloading shipping containers from trailers and rail wagons, repositioning containers on site, and lifting purpose-built container-based plant rooms, offices, and workshops.

How to Use Safely

1. Inspect each lug before use. Check the body, hook profile, spring-loaded bolt (CLB) and engagement surfaces for damage, wear or corrosion. Do not use if defects are found.
2. Verify the gross weight of the container does not exceed the rated WLL of the set (40,000 kg or 56,000 kg).
3. For CLB: engage each lug into the bottom corner-fitting hole at the appropriate orientation and confirm the spring-loaded bolt has snapped into place.
4. For CLT: engage each lug into the top corner casting of the container.
5. Connect a suitably rated 4-leg chain or wire-rope sling assembly to the four lugs. The sling assembly must be rated for the container's gross weight.
6. Confirm exclusion zones are in place and that a competent banksman or signaller is overseeing the lift.
7. Lift slowly with the crane, monitoring all four lug engagements at the initial lift. Stop and re-engage if any lug shows signs of slip or release.
8. After landing, fully relieve load on the lugs before disengaging the spring-loaded bolts and removing the lugs.

Inspection and Maintenance

A visual inspection is required before every use. A thorough examination by a qualified engineer is required at least every 6 months in regular use, in accordance with LOLER 1998. Records of examination must be kept. Refer to the manufacturer's manual for detailed inspection and maintenance instructions, derating factors for use, and replacement schedules for any wearing components.

Warranty & Support

Supplied with manufacturer's certification, identification, and operating instructions. WOLFF Onsite offers post-sales support including spares, certified inspection, and replacement. Contact our team for advice on selection, sizing, and application-specific configurations.

Frequently Asked Questions