Camlok TCS Coil Hook with Automatic 90° Tilting Device

Model TCS | Automatic 90° Coil Rotation | Adjustable Coil Width | 500–3000 kg | In Stock

The Camlok TCS Coil Hook is specifically designed for lifting coils of steel or banding material that are lying flat. As the crane hook is raised, the integrated tipping device automatically rotates the coil 90° from horizontal to vertical, enabling easy loading onto machines, racks or storage. The adjustable coil width range allows a single TCS model to handle multiple coil sizes. Available in eight variants from 500 kg to 3000 kg with a 4:1 safety factor and 3-day lead time — all variants are held in stock for immediate dispatch.

Technical Specifications

Model number reads as Capacity (tonnes) / Max Coil Width (mm). All variants in stock with 3-day lead time — significantly faster than the TCK C-Hook range. Coil width range covers two dimensions for each capacity, providing flexibility across coil sizes.

Key Features

• Automatic 90° tilting device — Coil rotates from horizontal to vertical automatically as the hook is raised — no manual intervention needed.
• Specialised flat-coil handling — Purpose-built for coils stored flat on pallets or in racks — handles them safely without lifting equipment damage.
• Adjustable coil width range — Each model covers a min-max coil width — one TCS handles a range of coil sizes.
• Smooth controlled tipping motion — Slow, safe transition minimises shock load and prevents damage to the coil.
• Integrated slip prevention — The tipping device doubles as a safety feature, preventing accidental coil slippage during lifting.
• 4:1 design safety factor — Manufactured to rigorous industrial lifting standards.
• In-stock availability — All variants held in stock with 3-day lead time for fast delivery.
• Camlok engineering quality — Part of the established Camlok CMCO range of specialist lifting attachments.

Suitable Applications

Steel service centres receiving coils stored flat on pallets, coil processing lines requiring vertical loading onto uncoilers, banding material handling, paper and cardboard reel handling where coils arrive flat and need to be rotated upright for further processing, and steel storage operations.

How to Use the Camlok TCS Coil Hook

1. Inspect the TCS before each use — check the body, tipping mechanism, suspension and hook engagement.
2. Confirm coil capacity is within the TCS rated WLL and coil width is within the rated min-max range.
3. Position the crane hook above the centre of the flat-lying coil.
4. Lower the TCS so the hook arm enters the coil bore.
5. Lift slowly — the tipping device will rotate the coil 90° from horizontal to vertical automatically.
6. Transport the upright coil to the destination with minimum swing.
7. Lower into the receiving rack or onto the next process — the coil will release as the load is removed.

Warning: Allow the tipping motion to complete fully before traversing. Do not stand under or beside the coil while the tipping device is rotating the load. Confirm the coil bore is centred under the crane hook before lifting.

Safety Information

• Never exceed the rated working load limit (WLL) displayed on the equipment.
• Never use the equipment if any component shows visible damage, wear or deformation.
• Keep all personnel clear of the lifted load at all times.
• Do not modify, repair or substitute components other than as specified by the manufacturer.
• Ensure the operator is trained, competent and authorised for the lifting operation.
• Do not shock load the equipment under any circumstances.

Inspection and Maintenance

Inspect before each use with particular attention to jaw faces, locking mechanism, shackle, hook and safety latch. Check for wear, distortion or damage to all load-bearing components. Thorough examination under LOLER 1998 is required at intervals not exceeding 6 months by a competent person. Use only genuine manufacturer replacement parts.

Frequently Asked Questions