UNIC URW-706-2 Mini Spider Crane with Hydraulic Jib

Model URW-706-2 | 6.0t × 3.0m Main Boom | 1.67m Width | 25.9m Lift Height (with fixed hook on jib) | Hydraulic Fly Jib as Standard | Kubota Diesel + Optional 400V

With the ability to lift up to 6 tonnes, the UNIC URW-706-2 is able to lift to a maximum hook height of 25.9 metres — an extra 3 metres more than the standard URW-706. This additional hydraulic jib / searcher hook makes it a truly versatile machine and provides that extra reach for tricky lifting projects. The URW-706-2 can be controlled from the operator’s seat or by a fully functional radio remote control for precise placement of loads. Digital feedback and data logging are also available as extras where required.

Technical Specifications

Specifications above are taken from the UNIC manufacturer's spec sheet at standard configuration. Variants with electric, LPG or other options may differ slightly — full rated capacity charts supplied with each hire.

Key Features

• Hydraulic fly jib as standard — 800kg capacity, 3.77–6.0m, with 0°/20°/40°/60° tilt angles
• 25.9m maximum hook height — fixed hook on jib — over 6m more than the standard URW-706
• 6 tonnes at 3.0m on the main boom — full capacity retained — jib is additional reach
• Industrial doorway access — 1.67m wide for indoor and double-doorway sites
• Optional variable footprint — with slew and height limitation for obstacle navigation
• Kubota diesel — with optional 400V mains electric dual power, zero length increase

Suitable Applications

The URW-706-2 is the go-to UNIC for jobs combining heavy lifts with extreme reach — tall stadium and arena steelwork, multi-storey atria, communications mast installations, shipyard internal lifts, and any project where 22.7m of fly jib reach plus 6-tonne main boom capacity is essential. The hydraulic jib’s tilt angles make over-obstacle placement faster and more controlled than a manual jib.

How to Set Up and Operate the URW-706-2

1. Survey the working area, verify ground bearing capacity against the published point loadings and confirm overhead clearances are sufficient for the proposed boom geometry.
2. Track the crane into position using the operator's seat or radio remote. Ensure the chassis is on firm, level ground or that load-spreader mats are deployed.
3. Deploy the outriggers to the configuration required by the lift plan — set each outrigger angle and extension, ensuring stabiliser pads make full contact with the ground.
4. Level the crane using the bubble level / auto-level system and verify all outrigger interlocks are engaged before luffing the boom.
5. Configure the rope reeving (1-fall, 2-fall, 4-fall or 5/6-fall as applicable) to match the planned load and required rope length.
6. Set any working area, slew or height limits required by the lift plan via the safe load indicator interface.
7. Carry out a function test, confirm the moment limiter and voice warning system are operational, then lift to working position and complete the lift in accordance with the lift plan.
8. On completion, return the boom to the stow position, retract outriggers and secure the crane for transit or overnight parking.

Warning: Spider cranes must only be operated by CPCS / NPORS / equivalent-certified operators working to an approved lift plan. Never exceed the rated capacity at the relevant radius shown on the load chart. Power source: Diesel + Optional 400V Electric.

Safety Information

• The crane must only be operated by competent, trained and certified operators familiar with this specific UNIC model.
• A documented lift plan, prepared by an Appointed Person, is required for every lifting operation under LOLER 1998.
• Ground conditions must be assessed against the manufacturer's point loadings — supplied on request — before each lift.
• Outriggers must be deployed to a configuration that supports the planned load at the planned radius; mixed-extension configurations require a competent rating check.
• Never operate the crane outside the rated load chart, override the safe load indicator, or carry loads with the boom in an unintended configuration.
• Carry out daily pre-use checks of hooks, wire ropes, hydraulics, safety devices and the moment limiter prior to first lift each shift.

Inspection and Maintenance

Spider cranes must be subject to a Thorough Examination by a Competent Person at least every 12 months under LOLER 1998, with additional 6-month examinations required where the crane is used to lift persons. Daily pre-use checks should cover wire rope condition, hook and shackle integrity, hydraulic system, outrigger pads, tracks, safety devices and the safe load indicator. All WOLFF Onsite hire cranes are supplied with a current Report of Thorough Examination and full service history. Defects identified in service must be reported immediately and the crane taken out of use until repaired.

Frequently Asked Questions