Modular Spreader Beams
Modular spreader beams built from interchangeable struts and end units, so one system covers a range of spans. The Multi-Sec Multi range comes in seven capacities, with spare struts and drop links in Multi-Sec components. Rig with shackles and slings rated for the lift.
- Products
- 7
- Brands
- Multi-Sec
- Price from
- £1,381
- Certification
- ✓ UKCA & CE
-
Multi-SecMulti-Sec Multi 170 Modular Spreader Beam SystemLifting centr.2m – 14.5mAvailable8 sizesDelivery2–3 daysfrom£11,972.34inc VAT£9,976.95ex VAT -
Multi-SecMulti-Sec Multi 110 Modular Spreader Beam SystemLifting centr.2m – 14.5mAvailable8 sizesDelivery2–3 daysfrom£8,213.98inc VAT£6,844.98ex VAT -
Multi-SecMulti-Sec Multi 75 Modular Spreader Beam SystemLifting centr.2m – 12mAvailable7 sizesDelivery2–3 daysfrom£6,465.91inc VAT£5,388.26ex VAT -
Hire or buyMulti-SecMulti-Sec Multi 50 Modular Spreader Beam SystemLifting centr.2m – 9.5mAvailable7 sizesDelivery2–3 daysfrom£3,469.50inc VAT£2,891.25ex VAT -
Hire or buyMulti-SecMulti-Sec Multi 25 Modular Spreader Beam SystemLifting centr.2m – 7.25mAvailable6 sizesDelivery2–3 daysfrom£2,311.68inc VAT£1,926.40ex VAT -
Hire or buyMulti-SecMulti-Sec Multi 13 Modular Spreader Beam SystemLifting centr.2m – 5.75mAvailable5 sizesDelivery2–3 daysfrom£1,657.45inc VAT£1,381.21ex VAT -
Multi-SecMulti-Sec Multi 250 Modular Spreader Beam SystemLifting centr.2m – 15.5mAvailable9 sizesDeliveryOn requestPrice on application
Modular Spreader Beams
How a Multi-Sec modular beam goes together
Every system on this page is from the Multi-Sec Multi range. Each beam is built from four types of part:
- End units: the main lifting connections at each end. The top slings attach here.
- Struts: interchangeable sections bolted between the end units to set the span.
- Drop links: hang below the end units and take the bottom rigging down to the load.
- Shackles and bolts: connect the top slings and bottom rigging, and join the sections.
The beam works in compression. Change the span by adding, removing or swapping struts. If you are still deciding between a spreader beam and a single-point lifting beam, our spreader beams guide covers that choice.
Picking the series
The number in each model name is its maximum working load limit in tonnes. Multisec publishes these limits for the range:
| Series | Max WLL | Max span | Kits on this page |
|---|---|---|---|
| Multi 13 | 13t | 7.75m | 2m to 5.75m |
| Multi 25 | 25t | 9.25m | 2m to 7.25m |
| Multi 50 | 50t | 12m | 2m to 9.5m |
| Multi 75 | 75t | 15m | 2m to 12m |
| Multi 110 | 110t | 18m | 2m to 14.5m |
| Multi 170 | 170t | 19.5m | 2m to 14.5m |
| Multi 250 | 250t | 22m | 2m to 15.5m |
Maximum WLL and maximum span do not apply at the same time. Capacity falls as span and sling angle increase, so check the rated capacity for the exact configuration you will rig. The kits on this page are sold by lifting centres, the distance between the two drop links.
Specifying the beam
To choose a series and kit length, work out:
- Total load: the item plus any rigging below the beam.
- Lifting centres: the distance between the lifting points on the load. This sets the strut combination.
- Top sling angle: Multisec rates configurations at 30° or 45° to vertical. A steeper sling angle gives a higher capacity at the same span.
- Headroom and centre of gravity: a spreader beam needs height for the top slings, beam and bottom rigging above the load.
If the job will change, buy the series that covers your heaviest lift and add struts later. Spare struts, end units, drop links and corner units for each series are on our Multi-Sec components page. Multisec states that components from different series must not be mixed, so order spares in the same series as your beam.
Assembly, frames and paperwork
Assemble the beam to Multisec's instructions and the configuration data supplied with it. Load the beam only through the drop links. The same struts, with four corner units in place of the end units, build a Multi-F four-point frame; see our modular lifting frames.
The standard Multi 13 to Multi 250 range holds DNV type approval to DNV-ST-0378, the standard for offshore and platform lifting appliances. Under LOLER, equipment whose safe working load varies with configuration must have the load for each configuration marked on it or kept with it. A spreader beam is a lifting accessory, so it needs a thorough examination at least every 6 months unless a written examination scheme sets other intervals. The Multi 13, 25 and 50 are available to hire as well as buy.
How does a modular spreader beam work?
Interchangeable struts bolt between two end units to set the span, and drop links at each end connect to the load. Adding or removing struts changes the lifting centres.
What capacity is a Multi-Sec Multi 25 spreader beam?
The Multi 25 has a maximum working load limit of 25 tonnes and a maximum span of 9.25m. Capacity at longer spans and wider sling angles is lower, so check the rating for your configuration.
Can I add struts to make my modular spreader beam longer?
Yes, within the series' maximum span. Use struts from the same series, as Multisec states components from different series must not be mixed.
Can a modular spreader beam be turned into a lifting frame?
Yes. Multi-Sec corner units used with the same series' struts build a four-point Multi-F lifting frame.
Are Multi-Sec modular spreader beams DNV approved?
Yes. The standard Multi 13 to Multi 250 range holds DNV type approval to DNV-ST-0378 for offshore and platform lifting.
Can I hire a modular spreader beam?
The Multi 13, Multi 25 and Multi 50 systems can be hired or bought. The larger systems are for sale.
Which brands do you stock for Modular Spreader Beams?
We supply Multi-Sec. Ranges vary, so check the brand page for the full listing.
What else is in Spreader Beams?
Related ranges include Multi-Sec Components and Modulift.