An auto pallet leveller relies on the platform sitting square to work correctly. On a sloped or uneven floor it will still level, but the platform sits off true and the load can shift toward the low side as it is built.
These levelling feet adjust individually to bring the base square regardless of the floor beneath it. Supplied as a set and fitted in minutes.
Key Features
- Individually adjustable — each foot set independently to bring the base square
- Fits all WRSPP360 models — standard and protective curtain variants
- Supplied as a set — everything needed for one leveller
- Simple installation — fitted in minutes without specialist tools
Technical Specifications
| Model |
Type |
Compatibility |
| WRSPP360-2000-SELF |
Levelling feet accessory |
All WRSPP360 Auto Pallet Levellers |
Supplied as a set. Please confirm your leveller model when ordering.
CE Marked | 12-Month On-Site Warranty
Supplied by Warrior, part of the Handling Equipment UK range. Manufactured to CE / UKCA standards and supplied with a declaration of conformity where applicable. Lift tables are issued with a test certificate to EN 1570 on request.
Warranty
Every Warrior product is supplied with a full 12-month on-site warranty covering parts and labour at no additional cost. Cover starts from the date of delivery and repairs are carried out at your premises rather than under a return-to-base arrangement. A comprehensive UK spare parts stock is held for every model in the range, and servicing, repair and statutory inspection can be arranged through WOLFF Onsite.
Suitable Applications
Any site where the pallet leveller is positioned on a sloped, uneven or newly screeded floor, or where the unit must be relocated between areas with differing floor levels.
How to Use
- Position the pallet leveller in its working location with the platform empty.
- Fit each levelling foot to the base.
- Adjust each foot until the base sits square and stable.
- Confirm all four feet are in contact and bearing load.
- Recheck after the first loaded cycle.
Warning: Confirm all feet are bearing load before using the leveller. A foot not in contact transfers load to the remaining three.
Safety Information
- Adjust with the platform empty only.
- Confirm all feet bear load before use.
- Recheck the setting if the leveller is relocated.
Inspection and Maintenance
Check the feet remain correctly adjusted and in contact during routine inspection of the leveller.
Frequently Asked Questions
Q: Do I need these?
Only if your floor is not level. On a sound, level floor the leveller works correctly without them.
Q: Will they fit my existing leveller?
Yes, they fit all WRSPP360 Auto Pallet Levellers including the protective curtain variant.
Q: How much adjustment do they give?
Enough for typical floor variation and light screed falls. For significant slopes, contact us before ordering.
