The P6000S is the super silenced version of Pramac's professional P Series portable generator. It uses the same Yanmar L100 single-cylinder diesel engine as the standard P6000 but houses it in an acoustic canopy, which makes it the appropriate choice for noise-sensitive sites: town-centre works, hospital and school grounds, residential streets, events, and any job operating under a local authority noise condition. All four builds are certified to Stage V, the current EU and UK non-road engine emissions standard, so the unit can be used on sites and in cities where Stage V compliance is a condition of entry.
Emissions Compliance
Stage V certified. Every P6000S build in this range meets the Stage V non-road mobile machinery emissions standard, which is a requirement for many local authority, London and major contractor sites.
Specification
| Specification |
Value |
| Model |
P6000S 230/110V |
| Product Code |
PF532SY4004 |
| Fuel |
Diesel |
| Engine Brand |
Yanmar |
| Engine Model |
L100 |
| Key Specification |
Stage V / 970x580x927mm / 203kg |
| Phase |
1 |
The P6000S Super Silenced Diesel Generator Range
| Product Code |
Model |
Voltage |
Phase |
Engine |
Emissions |
Dimensions (L x W x H) |
Weight |
Configuration |
| PF532SY4004 |
P6000S 230/110V |
230V / 110V |
Single |
Yanmar L100 |
Stage V |
970 x 580 x 927mm |
203kg |
Standard |
| PF532SY4006 |
P6000S 230/110V WHK |
230V / 110V |
Single |
Yanmar L100 |
Stage V |
1080 x 760 x 980mm |
203kg |
+WHK wheel kit |
| PF532SY400K |
P6000S 230V |
230V |
Single |
Yanmar L100 |
Stage V |
970 x 580 x 927mm |
203kg |
+CONN +DPP |
| PF602TY400A |
P6000S 400V |
400V |
Three |
Yanmar L100 |
Stage V |
970 x 580 x 927mm |
203kg |
+CONN +DPP |
Socket Configurations
| Model |
Outlets |
| P6000S 230/110V and 230/110V WHK |
1 x 230V 16A, 1 x 230V 32A, 2 x 110V 16A, 1 x 110V 32A |
| P6000S 230V |
1 x 230V 16A, 1 x 230V 32A, 1 x 230V Schuko |
| P6000S 400V |
1 x 400V 16A, 2 x 230V 16A, 1 x 230V Schuko |
Key Features
- Super silenced acoustic canopy — the enclosure is the defining difference from the standard P6000, cutting radiated noise for work near occupied buildings and in noise-restricted hours.
- Stage V certified Yanmar L100 diesel — a single-cylinder industrial diesel with a long service record in portable power, meeting the current non-road emissions standard.
- Choice of site voltage — 230/110V for UK construction where 110V tool supply is mandatory, 230V for general and event use, and 400V three phase for larger plant.
- CONN connector on the 230V and 400V builds — the CONN option provides a dedicated interface for external control, allowing wireless remote start/stop or an automatic mains failure panel to be added later.
- DPP differential protection — the 230V and 400V builds are supplied with differential protection against indirect contact, which is normally required for site distribution.
- Wheel kit option — the WHK build adds two wheels and handles for moving the set around site by hand rather than by plant.
- Consistent 203kg dry weight — light enough to be lifted by a small telehandler or van tail lift, without the trailer requirement of the larger GPW and GRW rental sets.
Suitable Applications
The P6000S is aimed at contractors and hirers who need reliable portable power where noise is a constraint. Typical uses are urban refurbishment and fit-out, rail and highways possessions, utility works in residential streets, outdoor events and marquees, film and broadcast location work, and standby supply for small commercial premises. The 230/110V builds are the standard specification for UK construction, where 110V centre-tapped supply is used for hand tools. The 400V three-phase build suits pumps, compressors, small three-phase machinery and temporary distribution boards. Where a higher output or a road-towable rental specification is needed, the GPW and GRW series are the next step up.
How to Use
- Site the generator on firm level ground in the open air, with clearance around the canopy for cooling airflow and exhaust discharge.
- Check engine oil, coolant and fuel levels before starting.
- Confirm the total connected load is within the set's rating, allowing headroom for motor starting currents.
- Start the engine and allow it to run up and stabilise before applying load.
- Connect loads at the socket panel, using the correct voltage outlets and appropriately rated leads.
- Shed the load before shutting down, then stop the engine and allow it to cool before refuelling.
Warning: Never operate a generator indoors, in a partially enclosed space, or anywhere exhaust can reach an occupied area. Exhaust contains carbon monoxide, which is colourless, odourless and fatal. Never refuel a hot or running engine.
Safety Information
- Operate only in the open air, well clear of doors, windows and air intakes.
- Keep the canopy closed while running, other than for the checks set out in the operator manual.
- Do not connect the generator directly to a building's fixed wiring without a correctly specified and installed changeover arrangement.
- Use only leads and connectors rated for the outlet and in sound condition, and inspect them before each use.
- Keep fuel and other flammables away from the exhaust and hot surfaces.
- Ensure the set is earthed in accordance with the site electrical arrangement.
Inspection and Maintenance
Carry out daily checks on oil, coolant, fuel and the air filter, and inspect the socket panel, leads and residual current protection before each use. Service intervals follow the Yanmar L100 schedule in the operator manual, based on running hours. Keep the acoustic canopy and its lining intact, as damaged acoustic material both raises noise output and disturbs cooling airflow. Generators used as work equipment fall under PUWER, and the electrical outlets and any supplied leads fall within the site inspection and test regime.
What's Included
- P6000S super silenced generator in the voltage ordered
- Operator manual and engine documentation
- Wheel kit fitted on WHK builds only
Frequently Asked Questions
Q: What is the difference between the P6000 and the P6000S?
Both use the Yanmar L100 Stage V diesel. The S is the super silenced version, housed in an acoustic canopy for noise-restricted work. The S is slightly larger and heavier at 203kg against 186kg for the standard open-frame P6000.
Q: Which build do I need for a UK construction site?
The 230/110V builds, product codes PF532SY4004 or PF532SY4006. UK construction requires 110V centre-tapped supply for hand tools, and these builds provide both 110V 16A and 110V 32A outlets alongside 230V.
Q: Does the P6000S start automatically on a mains failure?
Not as supplied. The 230V and 400V builds include the CONN connector, which allows an automatic mains failure panel or a wireless remote start/stop to be added. Both are available as accessories.
Q: What does Stage V certification mean in practice?
Stage V is the current emissions standard for non-road mobile machinery in the UK and EU. Many local authorities, London low emission zones for construction, and most principal contractors now require Stage V plant, so a non-compliant set may be refused on site.
Q: Can it be towed?
No. The P6000S is a portable skid-mounted set, optionally fitted with a wheel kit for manual movement around site. For road-towable units, the GPW and GRW rental series are the relevant ranges.
