The TrekDror TKD3D is part of the Armorgard range. Robust, steel sliding drawer for tools and equipment. External dimensions are 490mm x 1036mm x 490mm. Internal capacity 409x1036x440. Unit weight 58kg.
Key Features
- Corrugated steel casing for robustness
- Unique internal roller bearing system
- Comes with 3x keys
- Double locks on either side of unit for extra security
- Snug design with recessed handles
- 120kg UDL capacity per drawer and 1000kg UDL capacity on top
Technical Specifications
| Specification |
Value |
| Product Code |
TKD3D |
| External Dimensions (W x D x H) |
490mm x 1036mm x 490mm |
| Internal Dimensions |
409x1036x440 |
| Weight |
58kg |
| Material & Thickness |
1.5 steel |
| Finish |
Powder coated |
| Colour |
Black grey: RAL 7021 |
| Keys Supplied |
3 keys |
| Suitable For |
Vehicle |
| Manufacturer |
Armorgard |
More About This Product
Built from 1.5 steel with a powder coated finish, which is what lets it take daily site use. Supplied in Black grey: RAL 7021. Armorgard specify this unit for vehicle. Every unit carries a serial number, which is what replacement keys and spare parts are ordered against, so it is worth recording it when the unit arrives.
Suitable Applications
Suited to vehicle. Check the rated capacity against your intended load before use.
How to Use the TrekDror TKD3D
- Check the unit and its fixings before each use.
- Position the unit where it is needed and, where possible, secure it to a fixed point.
- Load within the rated capacity, keeping heavier items low.
- Lock the unit after every access and keep the keys secure.
- Record the serial number so replacement keys and spares can be ordered.
Warning:
Inspect before each use and withdraw from service any unit showing damage that affects its safe operation. Do not exceed any rated capacity. Wear appropriate PPE for the task.
Safety Information
- Do not exceed the rated capacity of the unit.
- Wear appropriate PPE for the task.
- Inspect for damage before use and withdraw from service any unit that is not safe to operate.
- Keep the unit locked when unattended.
Inspection and Maintenance
Inspect regularly for corrosion, impact damage and correct operation of locks, hinges and any gas struts. The unit is built from 1.5 steel with a powder coated finish, which stands up to site conditions but benefits from being kept clean. Replacement keys and spare parts are available from Armorgard against the serial number.
Optional Extras
- Rubber mat
- Divider kit (set of 3)
- Mounting plate kit
- Stacking plate kit
Frequently Asked Questions
Q: How much can I fit into TrekDror TKD3?
TKD3 is the largest sliding tool drawer in the range and can store larger pieces of equipment and taller tool cases, as well as loose tools.
Q: Can I stack TrekDror TKD3?
With the pre-drilled holes and optional stacking kit, TKD3 can be stacked with another TKD3 or a TKD1. Two units side by side also gives usable storage on top.
Q: Is TrekDror TKD3 secure?
Yes. Double 5-lever deadlocks and a steel build with reinforced ribs keep tools secure as well as organised.
