Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Hoists and Trolleys

Hand Chain Hoists

Manual chain hoists for lifting and positioning loads where no powered supply is available. Capacities from 250kg to 50 tonnes, with most models from Yale including low-headroom and ATEX versions. Fit them to steelwork with a beam trolley, or use a lever hoist for pulling and tensioning. Yale and Viper hoists come with a test certificate; ask for one when ordering a Raptor. Short-term job? Hire a hoist by the week.

Products
91
Brands
KITO, Yale +4
Price from
£62
Certification
✓ UKCA & CE
Products 91
Brands KITO, Yale +4
Price from £62
Certification ✓ UKCA & CE
Buying guide

Hand Chain Hoists

Choosing a hand chain hoist

A hand chain hoist, or chain block, lifts a load vertically from a fixed point. Pulling the hand chain turns a geared load sheave, and a brake holds the load when you stop. No power supply is needed. The choice on this page comes down to three things: how the hoist is suspended, how much headroom you have, and whether the site is a hazardous area.

Range Suspension Capacity on this page Choose it for
YaleMINI 360 Top hook 250kg to 500kg Light maintenance lifts and kit bags
Yale VSIII Top hook 250kg to 50 tonnes General lifting, indoors or outdoors
Yalelift 360 Top hook 500kg to 20 tonnes Operating from the side or above the load
Viper HSZ-L Top hook 500kg to 30 tonnes General lifting
Yalelift ITP / ITG Integrated push or geared trolley 500kg to 20 tonnes Lifting and travelling along a beam
Yale YL LHP / LHG Integrated low-headroom trolley 500kg to 10 tonnes Beams with little clearance below
Hook-mounted or integrated trolley

A hook-mounted hoist hangs from a rated anchor point, a beam clamp or a separate trolley. Pair it with a unit from our trolleys and trolley clamps range if you need to move the load along a beam. An integrated trolley hoist is one unit, so there is less height lost between beam and hook.

  • Push trolley (ITP, LHP): you move the load along the beam by pushing it.
  • Geared trolley (ITG, LHG): a second hand chain drives the trolley, so you traverse the load without touching it.

Check the beam before you order. Yale Yalelift IT and LH trolleys up to 5 tonnes come in two flange ranges: Range A for flanges up to 180mm, which is standard, and Range B for flanges up to 300mm. The wheels suit INP, IPE and IPB profiles with flange slopes up to 14% (DIN 1025 Part 1).

Headroom and working position

Where the beam is low, every millimetre between beam and hook counts. Yalelift IT and LH units up to 3,000kg use a single chain fall to cut headroom. The LH range goes further: its chain reeving lets the bottom block pull up almost against the beam flange.

The Yalelift 360 and YaleMINI 360 have a hand chain guide that rotates through 360 degrees. Operators can pull from the side or from above the load and stay out of the area under it. Their hooks are designed to open under overload rather than break. The VSIII has a fully enclosed stamped steel housing for outdoor use, with optional overload protection from 500kg.

ATEX hoists for hazardous areas

Standard hoists must not be used in explosive atmospheres. The Yale ATEX versions on this page add a spark-resistant coating. Yale offers copper-coated hooks from its MEDIUM protection level and a stainless steel load chain at HIGH. Match the protection level to your site's zone classification. Our ATEX hand chain hoists page lists these models on their own.

Lift height and LOLER examination

Order the height of lift you need, measured between the hook's highest and lowest positions. Extra chain adds weight and cost. Tell us the drop from the hoist to the floor so the hand chain reaches the operator.

A chain hoist is lifting equipment under LOLER. It needs a thorough examination at least every 12 months, or every 6 months if it lifts people, unless a written examination scheme sets other intervals. A trolley hoist assembled on site needs examining after installation and before first use. Slings and shackles used with it are lifting accessories and need examining every 6 months.

Common questions
Is a chain block the same as a hand chain hoist?

Yes. Chain block, chain hoist and hand chain hoist all describe a manually operated hoist that lifts a load vertically using a hand chain and geared load sheave.

What is a low headroom chain hoist?

It is a hoist built into its trolley so the hook sits as close to the beam as possible. The Yale YL LHP and LHG let the bottom block pull up almost against the beam flange, giving more usable lift under low steelwork.

Do I need a push or geared trolley chain hoist?

A push trolley is moved by pushing the load along the beam. A geared trolley is driven by its own hand chain, which gives finer control and suits heavier loads or beams the operator cannot reach.

What beam width will a trolley chain hoist fit?

Yale Yalelift IT and LH trolleys up to 5 tonnes come in Range A for flanges up to 180mm and Range B for flanges up to 300mm. Check flange width and profile before ordering.

How often does a chain hoist need a LOLER inspection?

At least every 12 months, or every 6 months if it is used to lift people, unless a written examination scheme sets a different interval.

Can a hand chain hoist be used in an ATEX zone?

Only an ATEX-rated version. Yale ATEX hoists have spark-resistant coating, with copper-coated hooks and stainless steel load chain at higher protection levels.

Which brands do you stock for Hand Chain Hoists?

We supply Yale, Viper, Tiger, Raptor, ALR and KITO. Ranges vary, so check the brand page for the full listing.

What else is in Hoists and Trolleys?