Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
3M 8822 FFP2 Valved Cup-Shaped Mask

3M 8822 FFP2 Valved Cup-Shaped Mask

Part no. BW-3M8822
£24.24£20.20Inc VATEx VAT
£20.20 ex VAT£24.24 inc VAT ·

About this item

  • FFP2 valved mask
  • Cool Flow valve
  • 10 x WEL

Product description

The 3M 8822 FFP2 Valved Cup-Shaped Mask.

Use 3M™ 8822 Cool Flow™ valve respirator for respiratory protection while sanding, drilling or sawing. Designed to provide FFP2 protection against medium levels of fine dust and oil or water based mists, typically found when working with paints, varnish, cement, softwood and steel.

3M™ Cool Flow™ valve helps release warm and moist exhaled breath from inside the respirator.

Key Features
  • DISPOSABLE PARTICULATE RESPIRATOR SUITABLE FOR - respiratory protection while sanding, drilling or sawing
  • THIS PARTICULATE RESPIRATOR HELPS PROTECT - against medium levels of fine dust typically found when working with softwood, gypsum, plaster, cement or steel
  • RESPIRATORY PROTECTION LEVEL FFP2 - this disposable respirator is designed to provide FFP2 protection with 94% particulate filtration
  • 3M RESPIRATOR DESIGNED FOR EASE OF BREATHING - 3M™ Cool Flow™ exhalation valve helps release warm and moist exhaled breath from inside the respirator - 3M™ Advanced Electrostatic Filter Media is a 3M proprietary filter media designed for ease of breathing
  • 3M TRUSTED EXPERTISE - over 50 years of science expertise in respiratory protection
  • Suggested application: hand sanding, powertool sanding, wall and ceiling sanding, metal work, masonry, painting, housekeeping, gardening
  • Complies with European standard EN 149:2001 + A1:2009 FFP2 NR D (CE 2797, UKCA 0086)
  • Pack contents: 5
  • Cool Flow valve
  • Collapse-resistant inner shell
  • Nose clip and twin straps for a secure fit
  • Blue colour-coded straps

Specifications

Product code3M8822
StandardEN 149:2001
ClassFFP2, valved
APF10 x WEL
Brand3M
Features3M™ Cool Flow™ Valve
Filter ClassFFP2
Filter MaterialPolypropylene
Respirator MaterialPolypropylene
Specifications MetEN 149:2001+A1:2009 FFP2 NR D
Strap MaterialPolyisoprene
Before you use it
  • Get face fit tested. A tight-fitting mask only protects if it seals to your face, so each wearer should be fit tested for the model they use.
  • Be clean shaven where the mask seals. Stubble and beards stop it sealing.
  • Do a seal check every time you put it on, following the maker's instructions.
  • FFP masks filter particles only. They give no protection against gases, vapours or low oxygen.
  • Replace it when it is damaged, dirty, hard to breathe through, or at the end of the shift for an NR mask.

Documents (1)

View on this page or download.

PDFDeclaration of Conformity
PDF document

Buying guide

Choosing the right FFP mask

EN 149 rates disposable dust masks (filtering facepieces) in three classes:

Class Filters at least Maximum total inward leakage
FFP1 80% of particles 22%
FFP2 94% of particles 8%
FFP3 99% of particles 2%

Your COSHH assessment sets the class you need. Hazardous dusts such as silica from cutting concrete, brick or stone, or hardwood dust, commonly need FFP3.

Other markings. NR means single shift use only, and R means the mask can be reused. D means it has passed the dolomite clogging test, so it stays more comfortable to breathe through in heavy dust.

A valve makes breathing out easier and reduces heat build-up.

Questions and answers

Q: Does an FFP mask protect against gases?

A: No. FFP masks protect against particles only (dust, mist and fume). For gases and vapours, use a reusable half mask such as the 3M 6000 series with gas filters.

Have a question about this product?Ask a question

More in Respiratory Protection

View all →