Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
3M Peltor Optime II Helmet-Mounted Ear Defenders H520P3E-410-GQ

3M Peltor Optime II Helmet-Mounted Ear Defenders H520P3E-410-GQ

Part no. BW-H520P3E-410-GQ
£28.74£23.95Inc VATEx VAT
£23.95 ex VAT£28.74 inc VAT ·

About this item

  • Helmet-mounted Optime II, up to 31 dB SNR
  • Liquid/foam sealing rings · roomy cups
  • Replaceable hygiene kit · P3E attachment

Product description

The 3M PELTOR Optime II H520P3E-410-GQ are high-performance ear defenders that clip onto a safety helmet using 3M's P3E helmet attachment. 3M rates them at up to 31 dB SNR, with good protection against very low-frequency noise.

They are suited to loud, demanding environments such as construction sites, airports, demolition, grinding and agricultural work.

Key Features
  • Up to 31 dB SNR (3M rating), tested to EN 352
  • Helmet-mounted with P3E attachment – fits helmets with a standard accessory slot
  • Sealing rings filled with a combination of liquid and foam for an effective, comfortable seal
  • Large space inside the cups helps reduce heat and moisture build-up
  • Soft, wide cushions reduce pressure around the ears
  • Replaceable cushions and foam inserts (hygiene kit) extend the product's life
  • Compatible with the 3M E-A-Rfit Dual-Ear Validation System

Specifications

Manufacturer3M PELTOR
ModelOptime II, H520P3E-410-GQ
TypeHelmet-mounted earmuffs (P3E attachment)
Noise reductionUp to 31 dB SNR (3M rating)
StandardsEN 352 (helmet-mounted ear protectors)
MaterialABS / polyurethane
ColourGreen
Wearing it properly
  • Ear plugs only work when fitted deep enough in the ear canal. Follow the fitting instructions on the pack.
  • Ear defenders need a good seal round the ear. Glasses arms, hair and hats under the cushions reduce protection.
  • Wear it the whole time you are in noise. Taking it off even for a short time greatly reduces the protection over the day.
  • Replace disposable plugs after use, and ear defender cushions when they harden or crack.
Spare Parts & Compatible Accessories
  • Hygiene kit: replacement sealing rings and foam inserts

Documents (1)

View on this page or download.

PDFDeclaration of Conformity
PDF document

Buying guide

Choosing the right hearing protection

EN 352 covers ear defenders (part 1), ear plugs (part 2) and helmet-mounted ear defenders (part 3). Each product has an SNR value: the average reduction, in decibels, it gives across a range of noise.

  • Under the UK Noise at Work Regulations, hearing protection must be made available at a daily exposure of 80 dB(A), and must be worn at 85 dB(A) and above.
  • Don't over-protect. HSE advises aiming for a level at the ear of between 70 and 80 dB(A). Too much protection cuts people off from speech and warning signals, and they tend to remove it.
  • Allow for real-world use. Protection in use is usually lower than the SNR measured in the lab, so check the fit and choose a type workers will keep on all the time they are in noise.

Questions and answers

Q: Will they fit my helmet?

A: The P3E attachment fits helmets with a standard accessory slot. Always check your helmet manufacturer's list of approved hearing protection.

Q: Can the cushions be replaced?

A: Yes. The cushions and foam inserts are available as a hygiene kit, so the muffs can be refreshed rather than replaced.

Q: When should I use the Optime II rather than the Optime I?

A: The Optime II gives higher attenuation and is designed for louder environments with substantial industrial noise. The Optime I suits moderate noise.

Have a question about this product?Ask a question

More in Hearing Protection

View all →