Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Ansell Industrial Latex Heavy Weight 24" Gauntlet

Ansell Industrial Latex Heavy Weight 24" Gauntlet

Part no. BWP-ILHW24
£24.95£20.79Inc VATEx VAT
£20.79 ex VAT£24.95 inc VAT ·
Size: choose one

About this item

  • Natural rubber glove
  • Good mechanical and chemical protection in heavy duty environments
  • High resistance to certain water-based chemicals

Product description

The Ansell Industrial Latex Heavy Weight 24" Gauntlet is a work glove.

It is available in 3 sizes.

Browse our full PPE and workwear range.

Key Features
  • Natural rubber glove
  • Good mechanical and chemical protection in heavy duty environments
  • High resistance to certain water-based chemicals
  • Good flexibility and elasticity reducing risk of tears
  • Chlorinated to harden and easily cleanse the surface of the glove
  • Beaded cuff for easy donning
  • 1.5mm Thickness
  • Aql 0.65
  • 24 INCH (610mm) length
  • Abrasion- Level 3
  • Cut Resistance- Cut B
  • Tear- Level 2

Specifications

Product codeILHW24
BrandAnsell
StandardsEN ISO 374-1:2016 (chemicals and micro-organisms); EN ISO 374-5:2016 (chemicals and micro-organisms); EN 388:2016 (mechanical risks)
Sizes8.5-09, 9.5-10, 10.5-11
Reading the EN 388 rating

EN 388 rates gloves against mechanical hazards. The code under the shield is read left to right, with higher numbers or letters giving more protection:

Position Tests Range
1 Abrasion 0 to 4
2 Cut, rotating blade (coupe test) 0 to 5
3 Tear 0 to 4
4 Puncture 0 to 4
5 Cut, straight blade (ISO 13997) A to F
6 Impact protection (if tested) P

An X means that test was not carried out or does not apply. For cut-resistant gloves, use the letter in position 5: the straight-blade test was added in 2016 because the rotating blade can be blunted by cut-resistant fibres, which makes the number less reliable.

Documents (1)

View on this page or download.

PDFDeclaration of Conformity
PDF document

Buying guide

Choosing for the job
  • Handling sheet material, glass or sharp edges: look at the cut letter first.
  • Rough materials such as blocks and timber: look at abrasion and tear.
  • Risk of crushing or knocks to the back of the hand: look for the P mark.
  • EN 388 covers mechanical hazards only. Chemicals, heat and cold have their own standards, shown as separate symbols on the glove.

Questions and answers

Q: How should gloves fit?

A: Gloves should be snug but not tight, with no excess material at the fingertips. Measure around the palm (excluding the thumb) to choose the size: typically 7 (S), 8 (M), 9 (L), 10 (XL) and 11 (XXL).

Have a question about this product?Ask a question

More in Gloves

View all →