
The cromox® CHT is a stainless steel push trolley that runs on the bottom flange of an I-beam, turning a fixed lifting point into one that travels along the runway.
It is rated from 0.63 t to 2.00 t, matching the cromox® CCH stainless chain hoist, and weighs about 7.0 kg to 8.5 kg.
Each trolley is built to the flange width of your beam. It is made by Ketten Wälder in Germany, tested to DIN EN 13157 and sits in our stainless steel lifting range.
| Type | WLL | a | x | b | c | d (diameter) | e | f | s | Weight |
|---|---|---|---|---|---|---|---|---|---|---|
| CHT | 0.63 to 2.00 t | 210 mm | Flange width | x + 100 mm | 164 mm | 40 mm | 28 mm | 11 mm | 10 mm | 7.0 to 8.5 kg |
| Material | Stainless steel |
|---|---|
| Ambient temperature | -40°C to +60°C |
| Relative humidity | Up to 100% |
| Hazardous areas | Ex zones only after consultation with the manufacturer |
| Standard | Tested to DIN EN 13157 |
| Manufacturer | Ketten Wälder GmbH, Germany (cromox®) |
Dimensions as lettered on the cromox® datasheet: a is the trolley length along the beam, c the overall height, and d, e and s the suspension slot and plate.
Ask for a certificate of conformity or test certificate when you order.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
The trolley is made to the beam it runs on. Its overall width (b) is the flange width (x) plus 100 mm, so the flange width is the key detail.
To quote, send us the beam flange width, the hoist capacity and the number of trolleys. For a matching stainless hoist, see the cromox® CCH chain hoist.
A: The beam flange width, the hoist capacity and the number of trolleys.
A: Overall width is the flange width plus 100 mm.
A: Yes. Both cover 0.63 t to 2.00 t and are stainless, so they pair naturally on a stainless runway.


Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account