The Crosby G-400 is an eye nut, forged from quenched and tempered steel and hot-dip galvanised, in 10 sizes with working load limits from 0.24t to 18.14t. It screws onto a stud or bolt to give a lifting or tie-off point.
Nuts are tapped with standard UNC class 2 threads after galvanising. They are also available blank (as forged) as item S-4028. The table below gives the thread size, working load limit and weight for each size.
Choose a size above to see its specifications.
| Stock No. | Size | WLL | Weight (kg) |
|---|---|---|---|
| 1090438 | 1 | .24t | 0.04 |
| 1090474 | 2 | .57t | 0.08 |
| 1090517 | 3A | 1.02t | 0.13 |
| 1090535 | 4 | 1.63t | 0.27 |
| 1090553 | 5 | 2.36t | 0.45 |
| 1090571 | 6 | 3.27t | 0.75 |
| 1090599 | 7 | 4.54t | 1.22 |
| 1090633 | 8 | 7.03t | 1.98 |
| 1090679 | 10 | 10.21t | 3.08 |
| 1090697 | 11 | 18.14t | 6.62 |
| Brand | Crosby |
| Range | G-400 Eye Nut |
View on this page or download.
A: The working load limit is the most the eye nut is rated to carry in normal use. Check Crosby's instructions for the reductions that apply to angled or side loads.
A: Crosby make further sizes and finishes in some ranges. Call us on 01709 437141 and we will check what's available.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account

Crosby makes rigging, lifting and load securement hardware, including shackles, hooks, wire rope clips, blocks, links and fittings. Its history goes back to 1888, when Oliver Crosby patented the forged wire rope clip. Crosby is now a brand of CMCO (Columbus McKinnon).
See all Crosby products →