The Green Pin Heavy Duty Bow Shackle is a Grade 8 alloy bow shackle for very heavy lifts, in 120 t and 150 t sizes. Its fixed nut safety pin is locked by an AISI 316 stainless securing bolt and Nord-Lock wedge-locking washers.
The 120 t size is hot dip galvanised and the 150 t has a silver painted body and green pin; ask us to confirm the applicable standard and temperature range. For the rest of the lifting assembly, see our chain and fittings.
| Code | WLL | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Securing bolt | H (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| GPHDBFN120 | 120 t | 95 | 95 | 204 | 95 | 147 | M12 | 644 | 110 |
| GPHDBFN150 | 150 t | 105 | 108 | 235 | 105 | 169 | M12 | 686 | 155 |
| Material | Grade 8 alloy steel body and pin, quenched and tempered |
|---|---|
| Finish | 120 t hot dip galvanised; 150 t silver painted body, green painted pin |
| Minimum breaking load | 5 x WLL |
| Weight | See size table |
| Securing bolt torque | 75 Nm (M12) |
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
Pin type. A screw collar pin is quick to fit and remove, for lifts where the shackle is not left in place. Choose a safety bolt shackle (bolt, nut and cotter pin) where the shackle stays in place for a long time, where the load can move over the pin and turn it, or where you need maximum pin security.
Two slings on one hook. Use a bow shackle, with the slings on the bow and the pin in the hook. Put no more than two sling legs on the bow, with no more than 120° between them. Loaded evenly like this, the full WLL can be used.
Side loading. Green Pin shackles are not designed for side loads. If one cannot be avoided, the WLL must be reduced using Van Beest's side-load chart.
The ROV shackles P-5363 and P-5367 are for in-line use only, and sling shackles have their own reduction curves.
Heat. Above 200 °C the WLL must be reduced:
| Temperature | Usable WLL |
|---|---|
| Up to 200 °C | 100% |
| 200 to 300 °C | 90% |
| 300 to 400 °C | 75% |
| Above 400 °C | Not allowed |
The nut is locked to the pin by a stainless bolt drilled through both, and Nord-Lock wedge-locking washers stop that bolt backing off. Replacement bolts must be tightened to the torque Green Pin specifies for the size.
Two sizes: 120 t and 150 t. The bow suits multi-leg rigging and loads from varying directions. For single in-line lifts, the heavy duty dee version is rated 120 t.
A: No. Fit original replacements, tightened to Green Pin's torque of 75 Nm, before use.
A: No. Never galvanise, plate or repaint without the supplier's approval.
A: The minimum breaking load is five times the WLL. Always work to the WLL.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
Green Pin is the lifting and lashing brand of Royal Van Beest, a family-owned manufacturer in Sliedrecht, the Netherlands. Dirk van Beest started forging shackles there in 1922, which were later sold as Green Pin. The range covers shackles, hooks, links, swivels, turnbuckles, wire rope fittings and fibre chain.
See all Green Pin products →