Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Green Pin® Standard Dee Shackle with Safety Nut and Bolt Pin – GPSAD
1 / 4

Green Pin Standard Dee Shackle with Safety Nut and Bolt Pin GPSAD

Part no. GPSAD2
£9.16£7.63Inc VATEx VAT
£7.63 ex VAT£9.16 inc VAT ·
Size: 2T

About this item

  • Standard dee shackle with safety nut and bolt pin, WLL 2t to 55t
  • Grade 6 steel, BS EN 13889 to 25t and ASME B30.26, MBL 6 x WLL
  • Hot dipped galvanised, rated -40°C to +200°C

Product description

The Green Pin Standard dee shackle (GPSAD) has a safety nut and bolt pin and a straight dee body for single in-line loads.

It is Grade 6 high tensile steel, hot dipped galvanised, from 2 t to 55 t. For other connecting hardware, see our chain and fittings.

Key Features
  • Grade 6 steel body and pin, quenched and tempered; hot dipped galvanised
  • BS EN 13889 (2 to 25 t); ASME B30.26
  • Minimum breaking load 6 x W.L.L.; -40°C to +200°C

Specifications

Choose a size above to see its specifications.

Compare all 13 sizes
Code W.L.L. (t) A bow dia. B pin dia. C eye dia. D eye width E inside width F inside length G length H bolt length I nut thickness Weight (kg)
GPSAD2 2 13.5 16 34 13 22 43 82 80 13 0.39
GPSAD3.25 3.25 16 19 40 16 27 51 97 98 17 0.67
GPSAD4.75 4.75 19 22 46 19 31 59 112 115 19 1.08
GPSAD6.5 6.5 22 25 52 22 36 73 134 130 22 1.66
GPSAD8.5 8.5 25 28 59 25 43 85 154 150 25 2.46
GPSAD9.5 9.5 28 32 67 28 47 90 168 166 27 3.4
GPSAD12 12 32 35 73 32 51 94 180 184 30 4.51
GPSAD13.5 13.5 35 38 79 35 57 115 209 197 33 6.1
GPSAD17 17 38 42 88 38 60 127 230 202 19 7.63
GPSAD25 25 45 50 104 45 74 149 271 243 23 12.9
GPSAD35 35 50 57 112 50 83 171 306 269 26 17.4
GPSAD42.5 42.5 57 65 132 57 95 190 346 301 29 25.9
GPSAD55 55 65 70 145 65 105 203 376 329 32 35.3

Dimensions in mm. Table trimmed to the sizes that can be ordered.

Before you use it
  • Check it. Markings must be legible, and the body and pin must be the same brand, type and size. Look for damaged threads, distortion, wear, nicks, gouges, cracks and corrosion. Never use a shackle with a bent pin, tight threads or misaligned pin holes.
  • Fit the pin properly. Screw a collar pin in hand-tight, then tighten it with a wrench so the collar sits fully on the eye. Never use a safety bolt shackle without its cotter pin.
  • Use only the matching pin. Never replace it with any other pin or bolt.
  • Never modify it. No welding, heating, machining or bending, and no washers welded inside the eyes to narrow the jaw.
  • Keep it away from acids and other harmful chemicals.
  • Hazardous work. The WLL assumes normal conditions. For offshore work, lifting people, or molten or corrosive loads, a competent person must reduce it.
  • Inspect it at least every 6 months, more often in severe conditions.

Documents (1)

View on this page or download.

PDFDatasheet
PDF document

Buying guide

Choosing the right Green Pin shackle

Pin type. A screw collar pin is quick to fit and remove, for lifts where the shackle is not left in place. Choose a safety bolt shackle (bolt, nut and cotter pin) where the shackle stays in place for a long time, where the load can move over the pin and turn it, or where you need maximum pin security.

Two slings on one hook. Use a bow shackle, with the slings on the bow and the pin in the hook. Put no more than two sling legs on the bow, with no more than 120° between them. Loaded evenly like this, the full WLL can be used.

Side loading. Green Pin shackles are not designed for side loads. If one cannot be avoided, the WLL must be reduced using Van Beest's side-load chart.

The ROV shackles P-5363 and P-5367 are for in-line use only, and sling shackles have their own reduction curves.

Heat. Above 200 °C the WLL must be reduced:

Temperature Usable WLL
Up to 200 °C 100%
200 to 300 °C 90%
300 to 400 °C 75%
Above 400 °C Not allowed

Questions and answers

Q: Why a safety nut and bolt pin?

A: The bolt is secured by a nut and split pin, so it cannot unscrew. That suits long-term or permanent rigging, or any lift where the pin could rotate under load.

Q: Bow or dee?

A: A bow shackle has a rounder body that takes loads from several directions, such as multi-leg slings. A dee shackle suits a single in-line load.

Q: How often must it be examined?

A: As a lifting accessory, a thorough examination by a competent person at least every 6 months under LOLER 1998, plus a check before each use.

Have a question about this product?Ask a question

More in Shackles

View all →