Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
GT Industrial Toe Jack – GTITJ

Industrial Toe Jack 2.5 t to 10 t GTITJ

Part no. GTITJ2.5
£234.00£195.00Inc VATEx VAT
£195.00 ex VAT£234.00 inc VAT ·
Size: 2,500kg toe / 5,000kg head

About this item

  • Industrial toe jack, 2,500kg to 15,000kg on the toe and 5,000kg to 30,000kg on the head
  • Minimum toe height from 18mm, with removable pump lever for accurate adjustment
  • Built-in overload protection, spring assisted return and over travel protection

Product description

The GT GTITJ is a heavy-duty industrial toe jack that lifts from a toe only 18 mm off the floor, or from its head at double the toe rating. Three models are orderable: 2.5 t, 5 t and 10 t on the toe (5 t, 10 t and 20 t on the head).

It has built-in overload protection, spring-assisted return, over-travel protection and a removable pump lever for fine adjustment.

Key Features
  • Toe lift from 18 mm (2.5 t model)
  • Head capacity twice the toe capacity
  • Overload, over-travel protection; spring return
  • Removable pump lever for accurate adjustment
  • 2.1 certificate and Declaration of Conformity available

Specifications

Choose a size above to see its specifications.

Compare all 3 sizes
Code Part no. Toe capacity Head capacity Toe height min-max (mm) Head height min-max (mm) L x W (mm) Weight (kg)
GTITJ2.5 T20605 2,500 kg 5,000 kg 18-130 235-362 60 x 34 10
GTITJ5 T20610 5,000 kg 10,000 kg 25-148 295-418 74 x 56 24
GTITJ10 T20620 10,000 kg 20,000 kg 32-173 330-471 102 x 67 38
Finish Red painted
Marking Capacity and traceability code
Certification 2.1 certificate and DoC available
What's Included
  • GT industrial toe jack in your chosen capacity, with removable pump lever

Using and looking after it

Always read the manufacturer’s instructions before use.

Typical Applications
  • Machine bases and transformers sitting flat on the floor
  • Machinery moving with skates
  • Plant installation
  • Heavy fabrication

Buying guide

Design & Construction

The toe takes the lower rating because the load sits off-centre on the claw; the head, directly over the ram, takes twice as much. Spring-assisted return brings the ram back down quickly once unloaded, and over-travel protection stops the ram being pumped out of the cylinder.

Choosing the Right Size

Choose by the toe capacity if you will lift from the floor, and check the minimum toe height fits the gap under the load. The compact GTTJ toe jack gets under loads with as little as 15 mm clearance.

Questions and answers

Q: Why is the head rated higher than the toe?

A: The head sits over the ram, so it carries twice the toe rating.

Q: Can I leave a load standing on the jack?

A: No. A jack lifts; it does not support. Transfer the load to rated stands or cribbing before anyone works under it.

Q: Does the floor matter?

A: Yes. A jack puts the whole load onto a small base, which can crack a screed or punch through a thin slab. Spread the load with a plate or timber where needed.

Have a question about this product?Ask a question

More in Hydraulic Jacks

View all →