Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
JD Neuhaus PROFI TI air chain hoist 0.5t to 20t
1 / 4

JD Neuhaus Air Chain Hoist Hire

Part no. LGH-HIRE-AIR-HOIST-0-5T-3M
Weekly hire
From £168.60/wkFrom £140.50/wkInc VATEx VAT
From £140.50/wk ex VATFrom £168.60/wk inc VAT ·
Capacity: 0.5t
Lift Height: 3m
Hire cannot start on days highlighted with a dotted border.
Total: £ ()
Excluding any selected add-ons
Hire return within days

About this item

  • Weekly hire of J D Neuhaus PROFI TI air chain hoists, 0.5t to 60t
  • ATEX explosion protected, 100% duty rated, pendant control
  • Certified, weekends not charged, delivered per mile

Product description

Hire a J D Neuhaus PROFI TI air chain hoist by the week for heavy lifting in hazardous or harsh areas. Driven by compressed air rather than electricity, it is explosion protected as standard and can run continuously without overheating.

Capacities run from 0.5 t to 60 t with 3 m to 12 m of lift. Hire units come with pendant control and overload protection.

Key Features
  • 0.5 t to 60 t, lift heights 3, 6, 9 and 12 m
  • ATEX explosion protected for Zone 1 and Zone 2
  • 100% duty: the air motor does not overheat
  • Infinitely variable speed for precise positioning
  • Overload protection on 1 t and above

Specifications

Choose a size above to see its specifications.

Compare all 12 sizes
Capacity Model Falls Lift speed at full load (6 bar)
0.5 t PROFI 05 TI 1 11 m/min
1 t PROFI 1 TI 1 5.5 m/min
2 t PROFI 2 TI 2 2.7 m/min
3.2 t PROFI 3 TI 1 5 m/min
6.3 t PROFI 6 TI 2 2.5 m/min
10 t PROFI 10 TI 2 1.6 m/min
16 t PROFI 16 TI 3 1.0 m/min
20 t PROFI 20 TI 4 0.7 m/min
25 t PROFI 25 TI 2 1.2 m/min
30 t PROFI 30 TI 2 1.0 m/min
50 t PROFI 50 TI 4 0.55 m/min
60 t PROFI 60 TI 4 0.45 m/min

Air supply: clean, dry compressed air at 6 bar with adequate flow (not included in the hire). Control: pendant (F-control). Explosion protection: ATEX, Zone 1 and Zone 2.

What's Included
  • J D Neuhaus PROFI TI air chain hoist with pendant (F-control)
  • Current report of thorough examination, with an ID matching the paperwork
  • Manufacturer's instructions

Hire is by the week, minimum one week, with weekends not charged, so seven days costs one week. Delivery and collection are charged per mile from our Sheffield depot and shown at checkout.

Extensions are at the same weekly rate, subject to availability. To buy rather than hire, see our hoists and trolleys.

Using and looking after it

Always read the manufacturer’s instructions before use.

Typical Applications
  • Oil, gas and petrochemical plants
  • Shipyards and offshore
  • Mining, cement, steel and foundry
  • Power generation and tank cleaning
  • Any ATEX-zoned or wet, dirty, high-duty area

Buying guide

Design & Construction

An air hoist uses a compressed-air motor in place of an electric one. With no electrical sparks or motor heat, it is suited to ATEX zones (areas where flammable gas, vapour or dust may be present).

Zone 1 means an explosive atmosphere is likely in normal operation; Zone 2 means it is unlikely and short-lived.

Because the motor is cooled by its own exhaust air, the hoist is rated for 100% duty, so it can run continuously. Speed varies with how far the pendant lever is pressed, which gives fine control when landing heavy loads.

The trade-off is air demand: the hoist needs a clean, dry 6 bar supply with enough flow for its size.

Questions and answers

Q: What air supply do I need?

A: Clean, dry compressed air at 6 bar. Larger hoists need a lot of flow, so check your compressor with us before hire.

Q: Can it go in a hazardous area?

A: Yes. PROFI TI hoists are ATEX protected for Zone 1 and Zone 2 as standard. Tell us your zone classification when booking.

Q: How is hire charged?

A: By the week, minimum one week. Weekends are not charged, so a seven-day hire costs one week.

Have a question about this product?Ask a question

More in Pneumatic Chain Hoists

View all →