Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Mapa Alto 405 Glove

Mapa Alto 405 Glove

Part no. BWP-MAPA405
£3.40£2.83Inc VATEx VAT
£2.83 ex VAT£3.40 inc VAT ·
Size: choose one

About this item

  • EN 388 2110X · EN ISO 374-1 Type B
  • Polychloroprene and FSCâ„¢ certified latex · 33 cm · 0.7 mm
  • Fine touch for light chemical protection

Product description

The Mapa Alto 405 is a liquidproof protection glove: fine touch for light chemical protection.

Made from FSCâ„¢ certified latex. It is made from polychloroprene and fscâ„¢ certified latex with a flocked lining and is certified as PPE Category III.

Key Features
  • Comfort good grip due to the non-slip embossing Tactile sensitivity, due to the gloves reduced thickness Cotton flocking provides added
  • Comfort and perspiration absorption
  • Additional benefits Optimised individual packaging format so as to limit plastic waste
  • Care for the environment FSCâ„¢ certified latex. Recycled packaging, Optimised individual packaging to limit plastic waste. Recycled material in the packaging: 30 %

Specifications

ManufacturerMapa Professional
ModelAlto 405
MaterialPolychloroprene and FSCâ„¢ certified latex
ColourBlue, Yellow
LiningFlocked
Outer finishEmbossed texture
Length33 cm
Thickness0.7 mm
Sizes6, 7, 8, 9, 10
Mapa packaging1 pair/bag, 10 pairs/bag, 100 pairs/carton
PPE categoryIII
EN 3882110X
EN ISO 374-1Type B – KMT
EN ISO 374-5Micro-organisms
EN 421Radioactive contamination
Life-cycle CO2 (Mapa LCA)0.87 kg CO2e per pair
Reading the EN 388 rating

EN 388 rates gloves against mechanical hazards. The code under the shield is read left to right, with higher numbers or letters giving more protection:

Position Tests Range
1 Abrasion 0 to 4
2 Cut, rotating blade (coupe test) 0 to 5
3 Tear 0 to 4
4 Puncture 0 to 4
5 Cut, straight blade (ISO 13997) A to F
6 Impact protection (if tested) P

An X means that test was not carried out or does not apply. For cut-resistant gloves, use the letter in position 5: the straight-blade test was added in 2016 because the rotating blade can be blunted by cut-resistant fibres, which makes the number less reliable.

Standards Explained

EN 388 2110X (mechanical risks):

  • Abrasion: level 2 of 4
  • Blade cut (coup): level 1 of 5
  • Tear: level 1 of 4
  • Puncture: below level 1
  • ISO 13997 cut: not tested

EN ISO 374-1 Type B (KMT): tested for permeation against sodium hydroxide 40% (K), nitric acid 65% (M), formaldehyde 37% (T). Type B requires at least 30 minutes' breakthrough time against at least three of the test chemicals.

EN ISO 374-5: protection against micro-organisms (bacteria and fungi).

Mapa Chemical Test Data (selection)

Breakthrough times measured by Mapa. Ratings: ++ high exposure/immersion, + repeated contact, = splash only, – not recommended. Always check the full Mapa chart for your chemical and conditions.

Acetic acid 50% >480 min (level 6)
Acetic acid 99% 48 min (level 2)
Acetone 99% 14 min (level 1) · rating +
Acetonitrile 99% 15 min (level 1) · rating +
Ammonium hydroxide solution 25% 23 min (level 1)
Ammonium hydroxide solution 29% 62 min (level 3)
Bromine 100% 6 min (level 0)
Carbon disulfide 99% 2 min (level 0) · rating -
Citric Acid 10% >480 min (level 6)
Cyclohexanone 99% 11 min (level 1) · rating =
More Mapa Gloves

Documents (1)

View on this page or download.

PDFDeclaration of Conformity
PDF document

Buying guide

Choosing for the job
  • Handling sheet material, glass or sharp edges: look at the cut letter first.
  • Rough materials such as blocks and timber: look at abrasion and tear.
  • Risk of crushing or knocks to the back of the hand: look for the P mark.
  • EN 388 covers mechanical hazards only. Chemicals, heat and cold have their own standards, shown as separate symbols on the glove.

Questions and answers

Q: Is it suitable for my chemical?

A: Check the chemical against the Mapa test data above and the full chemical chart on the Mapa datasheet. Laboratory breakthrough times are a guide only: temperature, glove thickness and abrasion all shorten real-world protection.

Q: Which size do I need?

A: Mapa makes it in sizes 6, 7, 8, 9, 10. Measure the circumference of the hand around the palm (excluding the thumb) and pick the matching size.

Have a question about this product?Ask a question

More in Gloves

View all →