Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Modulift MOD 12 - End Unit
1 / 2

Modulift MOD 12 - 1.0m Strut

Part no. MODU-0012-1.00
£284.15£236.79Inc VATEx VAT
£236.79 ex VAT£284.15 inc VAT ·

About this item

  • 1m strut for the Modulift MOD 12 spreader beam system
  • Series rated 12t at 4.75m span, up to 6.5m
  • Combine struts to build the span you need

Product description

The Modulift MOD 12 1.0 m strut (part 0012/1.00) is the standard one-metre strut. Struts bolt between two end units to set the span of a MOD 12 modular spreader beam, and the same struts can be rebuilt for different spans on later lifts.

It weighs 14 kg. This is a single component, not a complete beam; other lengths are in our MOD 12 components range.

Key Features
  • 1.0 m long, 14 kg
  • Bolts between MOD 12 end units or other struts
  • Also used to build CMOD 12 spreader frames
  • MOD 12 beam rated 12 t at 4.75 m span (30° STV)
  • Genuine Modulift part with certification

Specifications

End unit6
Drop link1.3
1.5 m strut19
1.0 m strut14
0.75 m strut11
0.5 m strut8
0.25 m strut6
8.5 t shackle (top)2.5
6.5 t shackle (lower)1.5
BoltsM12 x 35, grade 8.8, HT bolts, nuts and washers

MOD 12 component list, Table 1 of the Modulift User Instructions.

Part number 0012/1.00
Component Strut
Length 1.0 m
Weight 14 kg
Series Modulift MOD 12
Beam rating 12 t WLL at 4.75 m span (30° STV); see the Load v Span table for other spans
Span range 0.5 m to 6.5 m in 0.25 m steps
Max struts per assembly 5
Matched shackles 8.5 t top, 6.5 t lower
Bolt torque 90 Nm (19 mm spanner)
Complete set weight at max span 75 kg
What's Included
  • 1 x Modulift MOD 12 1.0 m strut (0012/1.00)
  • Manufacturer certification

You may also need: Other MOD 12 parts to complete the beam: end units, drop links and struts (0.25 m, 0.5 m, 0.75 m, 1.0 m, 1.5 m).

Documents (2)

View on this page or download.

PDFModulift MOD 12 User Instructions
PDF document
PDFModulift Inspection Guide
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Building MOD 12 spreader beams to the span a lift needs
  • Extending an existing MOD 12 set
  • Building CMOD 12 four-point frames
  • Lifting long loads where slings must stay vertical

Buying guide

Design & Construction

A MOD 12 beam is one pair of end units, one pair of drop links and the struts between them, bolted flange to flange with M12 grade 8.8 bolts torqued to 90 Nm. Spans run from 0.5 m to 6.5 m in 0.25 m steps, using no more than five struts.

The rating depends on the span and on the top sling angle from vertical (STV): 12 t at 4.75 m with 30° STV, less at longer spans or wider angles. The Modulift Load v Span table gives the figure for each build: at 45° STV, 12 t up to 3.5 m span, 10 t at 4.0 m, 7 t at 4.75 m, 4 t at 6.0 m and 3 t at 6.5 m; at 30° STV, 12 t up to 4.75 m, 11 t at 5.0 m, 7 t at 6.0 m and 6 t at 6.5 m; at 20° STV, 12 t up to 6.0 m and 10 t at 6.5 m.

Questions and answers

Q: Is a strut a complete beam?

A: No. A beam needs two end units, two drop links and the struts that set the span.

Q: Which struts do I need?

A: Add up end units and struts to the span you need, up to five struts. Send us the span, load and sling angle and we will confirm the build.

Q: Can I mix MOD 12 parts with another Modulift series?

A: No. Flange sizes, bolt patterns and ratings differ between series, so use MOD 12 parts throughout.

Have a question about this product?Ask a question

More in Modulift MOD 12

View all →