Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Moldex 2360 FFP1 NR D Disposable Dust Mask (Box of 20)

Moldex 2360 FFP1 NR D Disposable Dust Mask (Box of 20)

Part no. BW-MOL2360
£33.79£28.16Inc VATEx VAT
£28.16 ex VAT£33.79 inc VAT ·

About this item

  • FFP1 NR D – at least 80% filtration
  • ActivForm shape, no nose clip, made in Europe
  • EN 149 · box of 20

Product description

The Moldex 2360 is a Classic FFP1 NR D disposable mask without a valve, sold in boxes of 20. FFP1 is for low levels of nuisance dust where the exposure is below the workplace limit.

Moldex's standard model offers all the advantages that make Moldex FFP masks so successful.

The flexible ActivForm 3D design adapts automatically to the shape of the wearer's face and their facial movements. As a result, Classic masks are easy to wear and sit securely and comfortably on the skin at all times, without the need for a nose clip.

The DuraMesh structure preserves the shape of the mask under even the most testing conditions, while a soft, skin-friendly inner fleece layer provides additional comfort for the wearer.

Classic FFP masks offer reliable protection against particles in the air we breathe. They are available in the protection levels FFP1, FFP2 and FFP3.

Key Features
  • Reliable protection against particles
  • ActivForm 3D design for a comfortable and secure fit
  • Retains its shape thanks to the mesh structure
  • Cleanly Packaged A bag protects the packaged masks against dust and moisture
  • Packaging Options Available in a variety of packaging types and quantities
  • Made In Europe All Moldex FFP masks are 100% made in Europe.
  • DuraMesh Robust mesh structure that preserves the mask's shape
  • ActivForm Mask adapts to the shape of the wearer's face
  • High Performance Filter Developed and produced by Moldex in Germany
  • Comfort Fleece Soft, skin-friendly fleece layer on the inside of the mask
  • Loop-Strap Enables precision adjustment of the distribution of tension over the head

Specifications

ManufacturerMoldex
Moldex product number236015
Protection classFFP1 NR D
ValveNo
FiltrationAt least 80% (EN 149)
Assigned protection factor4 (HSE HSG53)
Pack contents20 masks
StandardEN 149:2001 + A1:2009
PPE Regulation(EU) 2016/425
Shelf life (from production, stored properly)5 years
Before you use it
  • Get face fit tested. A tight-fitting mask only protects if it seals to your face, so each wearer should be fit tested for the model they use.
  • Be clean shaven where the mask seals. Stubble and beards stop it sealing.
  • Do a seal check every time you put it on, following the maker's instructions.
  • FFP masks filter particles only. They give no protection against gases, vapours or low oxygen.
  • Replace it when it is damaged, dirty, hard to breathe through, or at the end of the shift for an NR mask.
EN 149 explained

EN 149 classes disposable filtering half masks by filter efficiency and total inward leakage. FFP1 masks filter at least 80% of airborne particles (inward leakage no more than 22%), FFP2 at least 94% (no more than 8%) and FFP3 at least 99% (no more than 2%).

HSE guidance HSG53 gives them assigned protection factors of 4, 10 and 20 respectively. NR means non-reusable, for a single shift only.

D means the mask has passed the dolomite dust clogging test, so it stays easier to breathe through in dusty conditions.

Compatible Products and Spares

Documents (1)

View on this page or download.

PDFDeclaration of Conformity
PDF document

Buying guide

Choosing the right FFP mask

EN 149 rates disposable dust masks (filtering facepieces) in three classes:

Class Filters at least Maximum total inward leakage
FFP1 80% of particles 22%
FFP2 94% of particles 8%
FFP3 99% of particles 2%

Your COSHH assessment sets the class you need. Hazardous dusts such as silica from cutting concrete, brick or stone, or hardwood dust, commonly need FFP3.

Other markings. NR means single shift use only, and R means the mask can be reused. D means it has passed the dolomite clogging test, so it stays more comfortable to breathe through in heavy dust.

A valve makes breathing out easier and reduces heat build-up.

Questions and answers

Q: Is FFP1 enough for silica or wood dust?

A: Usually not. HSE guidance generally calls for at least FFP3 for respirable crystalline silica and hardwood dust. Use your risk assessment and COSHH data.

Q: Does it need a nose clip?

A: No. Moldex designs the ActivForm shape to adapt to the face without a nose clip.

Q: Do I need a face-fit test?

A: Yes. In the UK, tight-fitting respirators, including disposable FFP masks, must be face-fit tested to each wearer. The Moldex fit test kit is designed for qualitative testing of FFP and half masks.

Have a question about this product?Ask a question

More in Respiratory Protection

View all →