Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Multi-Sec Multi 25 Header Sling

Multi-Sec Multi 25 Strut

Part no. MS-ST-25-0-25M
£445.50£371.25Inc VATEx VAT
£371.25 ex VAT£445.50 inc VAT ·
Strut Length: 0.25m

About this item

  • Bolt-in strut for the Multi 25 modular system, rated to 25 tonnes
  • Available in 0.25m, 0.5m, 0.75m, 1m, 2m and 4m lengths to set or extend the span
  • Common to the Multi 25 spreader beam and Multi F 25 lifting frame

Product description

The Multi-Sec Multi 25 strut (MS-ST-25) is a bolt-together section for the Multi 25 modular spreader beam.

Struts of different lengths are joined between two end units to build a beam to the span you need, then taken apart for transport and storage.

The Multi 25 system has a maximum rated capacity of 25 tonnes, with spans from 1.0 m to 9.25 m. The capacity at any span depends on span and sling angle, given in the instructions for use.

Key Features
  • Modular section for Multi 25 spreader beams
  • Lengths: 0.25 m, 0.5 m, 0.75 m, 1 m, 2 m, 4 m
  • System max capacity 25 t (falls with span and sling angle)
  • Bolted joints for quick assembly
  • DNV-ST-0378 type approved
  • UK made, 100% proof tested

Specifications

Part codeMS-ST-25
Lengths0.25 m, 0.5 m, 0.75 m, 1 m, 2 m, 4 m
System maximum WLL25 t (span and sling-angle dependent)
System span range1.0 m to 9.25 m
Beam WLL by span (Multisec)25 t up to 5.5 m span at 45° STV and up to 7.25 m at 30° STV; 7 t (45°) or 15 t (30°) at 9.25 m
FixingsM12 x 60 Grade 8.8 bolts, 72 Nm (per WOLFF end unit page)
ManufacturerDurham Lifting Ltd (Multi-Sec), UK
ApprovalDNV Type Approved to DNV-ST-0378
Testing100% proof tested
What's Included
  • 1 x strut in the length ordered
  • Bolts, nuts and washers

Build the beam with two Multi 25 end units and two drop links.

Using and looking after it

Always read the manufacturer’s instructions before use.

Typical Applications
  • Spreader beam lifts on site and in workshops
  • Offshore and marine lifting
  • Lifting long or awkward loads with vertical slings
  • Plant, tank and module installation

Buying guide

Design & Construction

A Multi-Sec beam is built from two end units with struts bolted between them. The top shackles on the end units take the lifting slings; drop links under the end units take the load slings.

Changing struts changes the span, so one kit covers many lifts.

Choosing the Right Model
Length Part code Weight (IFU Table 2)
0.25 m MS-ST-25 19 kg
0.5 m MS-ST-25 25 kg
0.75 m MS-ST-25 32 kg
1 m MS-ST-25 39 kg
2 m MS-ST-25 65 kg
4 m MS-ST-25 118 kg

Questions and answers

Q: What capacity will my beam have?

A: It depends on span and the top sling angle. Multi-Sec publishes a capacity table for every span: the full 25 t applies up to 5.5 m span at 45° STV and up to 7.25 m at 30° STV, falling to 7 t (45°) or 15 t (30°) at the maximum 9.25 m. Check your span in the Multi-Sec table or the instructions for use.

Q: What else do I need?

A: Two Multi 25 end units, two drop links and the top and bottom shackles, plus the struts to make up the span.

Have a question about this product?Ask a question

More in Multi-Sec Components

View all →