The pewag KSSW 16 is a Grade 10 (winner 400) clevis turnbuckle for tensioning 16 mm lashing chains to EN 12195-3.
Its clevis ends pin directly into the chain, and turning the body draws the ends together over a 250 mm tension range. A Grade 8 version, the KSS clevis turnbuckle, is also available.
It is rated at 200 kN lashing capacity, for securing heavy plant and loads on low-loaders.
View on this page or download.
A turnbuckle tensions by turning a threaded body, giving fine, controlled adjustment that will not spring open like a lever binder. pewag gives no STF for the KSSW, so it is for direct lashing (tying the load to the vehicle anchor points), not frictional lashing. LC (lashing capacity) is the maximum force the component may carry in direct lashing; STF (standard tension force) is the pre-tension the binder applies, which matters for frictional lashing, where the load is held by pressing it onto the deck.
A: 16 mm pewag Grade 10 lashing chain, via its clevis ends.
A: pewag publishes no STF for it, so plan it for direct lashing.
A: Yes, with the KBSW spare parts set.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
pewag's history goes back to 1479, the first documented reference to a forge in Brückl, Austria. It describes itself as one of the world's oldest and most trusted chain manufacturers, making lifting chain systems, components and traction chains.
See all Pewag products →