Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
pewag PLAW Alpha Swivel Lifting Point
1 / 2

pewag PLAW Alpha Swivel Lifting Point

Part no. PWG-LP-PLAW
£72.34£60.28Inc VATEx VAT
£60.28 ex VAT£72.34 inc VAT ·
Size: choose one

About this item

  • Rotates 360°, ring positions at any angle
  • Replaceable special screw, secured against loss
  • 0.3 to 20 tonnes, M8 to M48

Product description

The pewag PLAW Alpha is a swivel lifting point whose load ring rotates through 360° and can be set at any angle. The hexagon special screw can be replaced and is held captive so it cannot be lost. Sizes run from M8 at 0.3 t to M48 at 20 t.

Key Features
  • 360° rotation; load ring can be set at any angle
  • Replaceable hexagon special screw, secured against loss
  • 4-fold safety factor against breakage in all directions
  • Metric or UNC thread; custom thread lengths on metric
  • peTAG available on request

Specifications

Choose a size above to see its specifications.

Compare all 14 sizes
Thread W.L.L. (straight lift) Bolt lengths offered
M8 0.3 t standard, special, maximum
M10 0.63 t standard, special, maximum
M12 1 t (/Y) standard
M16 1.5 t (/Y) standard
M20 2.5 t standard, special, maximum
M24 4 t standard, special, maximum
M30 6 t (/Y) standard, special, maximum
M36 7 t standard, special, maximum
M36 8 t standard, special, maximum
M42 10 t standard, special, maximum
M42 15 t standard, special, maximum
M48 20 t standard, special, maximum
M12 1 t special, maximum
M16 1.5 t special, maximum

pewag load table

pewag code Thread Torque (Nm) 1 leg 0° (kg) 1 leg 90° (kg) 2 legs 0° (kg) 2 legs 90° (kg) 2 legs 0 to 45° (kg) 2 legs 45 to 60° (kg) 3+4 legs 0 to 45° (kg) 3+4 legs 45 to 60° (kg)
PLAW 0.3 t M8 35 300 300 600 600 400 300 600 400
PLAW 0.63 t M10 70 630 630 1,250 1,250 850 630 1,300 900
PLAW 1 t M12 120 1,000 1,000 2,000 2,000 1,400 1,000 2,100 1,500
PLAW 1.5 t M16 150 1,500 1,500 3,000 3,000 2,100 1,500 3,100 2,200
PLAW 2.5 t M20 170 2,500 2,500 5,000 5,000 3,500 2,500 5,300 3,700
PLAW 4 t M24 400 4,000 4,000 8,000 8,000 5,600 4,000 8,400 6,000
PLAW 6 t M30 500 6,000 6,000 12,000 12,000 8,500 6,000 12,700 9,000
PLAW 7 t M36 700 7,000 7,000 14,000 14,000 9,800 7,000 14,800 10,500
PLAW 8 t M36 800 8,000 8,000 16,000 16,000 11,300 8,000 16,900 12,000
PLAW 10 t M42 1,500 10,000 10,000 20,000 20,000 14,000 10,000 21,000 15,000
PLAW 15 t M42 1,500 15,000 15,000 30,000 30,000 21,000 15,000 31,500 22,500
PLAW 20 t M48 2,000 20,000 20,000 40,000 40,000 28,000 20,000 42,000 30,000

From the pewag PLAW operating manual, Table 1. The PLAW carries the same W.L.L. at 0° and 90°. Asymmetric 2 leg and 3+4 leg lifts are at the marked W.L.L.

Dimensions and weights

Code Thread a b c d e f g l n n max A B Weight (kg)
PLAW 0.3 t M8 45 67 11 41 95 36 40 55 20 150 10 24 0.57
PLAW 0.63 t M10 45 67 11 41 95 36 40 55 20 150 10 24 0.58
PLAW 1 t M12 45 67 11 41 95 36 40 55 20 170 10 24 0.60
PLAW 1.5 t M16 45 67 11 41 95 36 40 55 24 260 10 24 0.60
PLAW 2.5 t M20 54 81 13 55 112 50 50 67 33 335 8 24 1.10
PLAW 4 t M24 54 87 17 67 142 45 50 70 36 361 14 36 1.60
PLAW 6 t M30 68 108 20 68 148 55 60 85 45 360 14 36 2.50
PLAW 7 t M36 75 115 20 65 143 60 67 100 55 374 27 - 3.30
PLAW 8 t M36 93 147 27 87 188 85 85 120 55 365 19 41 3.80
PLAW 10 t M42 93 147 27 87 188 85 85 120 65 365 19 41 4.80
PLAW 15 t M42 115 181 33 108 246 106 105 150 63 340 19 55 12.00
PLAW 20 t M48 115 181 33 108 246 106 105 150 73 340 19 55 12.30

Dimensions in mm, from the pewag winner pro lifting points catalogue.

These are straight lift values; angled and multi-leg ratings are in the pewag load table. /Y denotes a variant code used by pewag.

Documents (2)

View on this page or download.

PDFpewag Operating manual PLAW EN
PDF document
PDFpewag Catalogue winner pro points EN
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Machine building and plant installation
  • Moulds, dies and machine parts
  • Steel fabrication
  • Turning and tilting loads

Questions and answers

Q: Is the marked W.L.L. the figure to use?

A: Use the pewag load table for your lifting method. Ratings change with the number of legs and the angle of the sling, and the full table is in the pewag operating manual.

Q: What do the thread length options mean?

A: Standard length suits most tapped holes. Maximum length and special length (state the length you need when ordering) are for deeper holes or thicker material, so the bolt engages fully. Check thread engagement against the pewag operating manual.

Q: Can the screw be replaced?

A: Yes. The hexagon special screw is replaceable and held captive. Use only genuine pewag screws.

Have a question about this product?Ask a question

More in Lifting Points

View all →