The pewag PLGWI Gamma inox is a rotating lifting point in duplex stainless steel 1.4462, made for corrosive and hot environments. It turns to line up with the load, is rated for use up to 280°C, and is marked for 45° and 60° tilt angles.
Choose a size above to see its specifications.
| Version | W.L.L. (marked) | Thread | Bolt lengths offered |
|---|---|---|---|
| Supreme | 2 t | M20 | standard, special, maximum |
| Basic | 0.5 t | M12 | standard, special, maximum |
| Basic | 1 t | M16 | standard, special, maximum |
| Code | Thread | Torque (Nm) | 1 leg 0° (kg) | 1 leg 90° (kg) | 2 legs 0° (kg) | 2 legs 90° (kg) | 2 legs 0 to 45° (kg) | 2 legs 45 to 60° (kg) | 3+4 legs 0 to 45° (kg) | 3+4 legs 45 to 60° (kg) | a | b | c | d | e | f | n | n max | A | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PLGWI 0.5 t | M12 | 25 | 1,500 | 500 | 3,000 | 1,000 | 700 | 500 | 1,060 | 750 | 30 | 55 | 12 | 30 | 59 | 30 | 18 | 160 | 8 | 0.23 |
| PLGWI 1 t | M16 | 50 | 3,000 | 1,000 | 6,000 | 2,000 | 1,400 | 1,000 | 2,100 | 1,500 | 35 | 64 | 14 | 35 | 67 | 35 | 24 | 160 | 10 | 0.36 |
| PLGWI 2 t | M20 | 115 | 3,800 | 2,000 | 7,600 | 4,000 | 2,800 | 2,000 | 4,200 | 3,000 | 40 | 72 | 17 | 40 | 80 | 45 | 30 | 160 | 12 | 0.60 |
From the pewag winner pro lifting points catalogue. Dimensions in mm. Asymmetric lifts are at the marked W.L.L., which is the 90° rating.
The marked W.L.L. is for the least favourable permitted direction of pull. Higher straight lift values, and ratings for angled and multi-leg lifts, are in the pewag load table.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
A: In food, pharmaceutical, marine and chemical settings where a carbon steel lifting point would corrode. Offshore use is subject to pewag's approval. For fall protection, see the PLGWI-PSA stainless anchorage point.
A: Use the pewag load table for your lifting method. Ratings change with the number of legs and the angle of the sling, and the full table is in the pewag operating manual.
A: Standard length suits most tapped holes. Maximum length and special length (state the length you need when ordering) are for deeper holes or thicker material, so the bolt engages fully. Check thread engagement against the pewag operating manual.
A: As a lifting accessory it needs a thorough examination by a competent person at least every 6 months under LOLER 1998, plus a check before each use, following the pewag operating manual.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
pewag's history goes back to 1479, the first documented reference to a forge in Brückl, Austria. It describes itself as one of the world's oldest and most trusted chain manufacturers, making lifting chain systems, components and traction chains.
See all Pewag products →