Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Sealey Low Entry Short Chassis Trolley Jack & Accessories Bag Combo, 2 Tonne - Red – 1020LEBAGCOMBO
1 / 4

Sealey Low Entry Short Chassis Trolley Jack & Accessories Bag Combo, 2 Tonne - Red 1020LEBAGCOMBO

Part no. 1020LEBAGCOMBO
£166.45£138.71Inc VATEx VAT
£138.71 ex VAT£166.45 inc VAT ·

About this item

  • 2 tonne capacity
  • Length: 563 mm
  • Min./Max. saddle height: 85/385 mm

Product description

The Sealey 1020LEBAGCOMBO is a low entry short chassis trolley jack & accessories bag Combo, 2 tonne - red, with a length of 563 mm and a min./max. saddle height of 85/385 mm.

Trolley jacks roll under the load on castors and lift quickly, which makes them the everyday choice for vehicle and light plant work.

For other sizes and options, browse our full trolley jacks range. It works well with our axle stands to support the vehicle once it is raised, and our wheel chocks and ramps to stop it rolling.

Key Features
  • 2 tonne capacity
  • Length: 563 mm
  • Min./Max. saddle height: 85/385 mm
  • Low-profile design for low clearances
  • Wheeled for moving around the workplace
  • Folds away for storage

Specifications

Product code1020LEBAGCOMBO
Capacity2 tonne
Length563 mm
Min./Max. saddle height85/385 mm
Maximum chassis height133 mm
Capacity (pair)4 tonne
Min./Max. working height280/368 mm
Warranty informationBacked by our 1-year guarantee, in addition to your statutory rights. Guarantee excludes general wear, tear and misuse. <a href="https://www.sealey.co.uk/guarantee" target="_blank">See full guarantee terms</a> for details.
Warranty1 year
What's Included
  • Sealey Low Entry Short Chassis Trolley Jack & Accessories Bag Combo, 2 Tonne - Red

Using and looking after it

Always read the manufacturer’s instructions before use.

Using it safely
  • A trolley jack lifts; it does not support. Never get under a vehicle held only by a jack. Lower it onto correctly rated axle stands, used in pairs, before any work.
  • Work on a hard, level surface, with the handbrake on and the wheels chocked.
  • Lift only at the vehicle maker's recommended lifting points, with the lifting point centred on the saddle.
  • Never move the vehicle on the jack, and don't jack it where there is a risk of fuel, battery acid or other dangerous spills.
  • Top up only with hydraulic jack oil, never brake fluid, and have the hydraulics repaired only by a qualified person.
Typical Applications
  • Vehicle and van servicing
  • Tyre and brake work
  • Fleet maintenance
  • Light plant maintenance

Buying guide

Choosing the right trolley jack
  • Capacity. Choose a jack rated for more than the load you will lift, and never exceed its rated capacity.
  • Minimum saddle height. The saddle must fit under the vehicle's lifting point when the jack is fully lowered. Low-profile and short-chassis jacks suit lowered cars and tight spaces.
  • Maximum lift height. The jack must raise the vehicle high enough to fit axle stands underneath.

Questions and answers

Q: What is the min./max. saddle height of the 1020LEBAGCOMBO?

A: The 1020LEBAGCOMBO has a min./max. saddle height of 85/385 mm. The full figures are in the specifications.

Q: Will it fit under my vehicle?

A: Check the minimum height in the specifications against the vehicle's ground clearance at the jacking point.

Q: What warranty does it come with?

A: It comes with a 1-year Sealey warranty against manufacturing defects. Normal wear and tear and misuse are not covered.

Have a question about this product?Ask a question

More in Trolley Jacks

View all →