Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Sealey Premier Trolley Jack 3 Tonne & Axle Stands (Pair) 3 Tonne per Stand Combo – 3040AGCOMBO1
1 / 4

Sealey Premier Trolley Jack 3 Tonne & Axle Stands (Pair) 3 Tonne per Stand Combo 3040AGCOMBO1

Part no. 3040AGCOMBO1
£272.95£227.46Inc VATEx VAT
£227.46 ex VAT£272.95 inc VAT ·

About this item

  • Plug type: 3-Pin BS
  • Rocket Lift reaches the load in fewer pumps
  • 3-year Sealey warranty

Product description

Sealey's 3040AGCOMBO1 is a Premier trolley jack 3 tonne & axle stands (pair) 3 tonne per stand combo offering a plug type of 3-Pin BS.

Trolley jacks roll under the load on castors and lift quickly, which makes them the everyday choice for vehicle and light plant work.

You'll find the rest of the range in our trolley jacks section. It works well with our axle stands to support the vehicle once it is raised, and our wheel chocks and ramps to stop it rolling.

Key Features
  • Plug type: 3-Pin BS
  • Rocket Lift reaches the load in fewer pumps
  • 3-year Sealey warranty

Specifications

Product code3040AGCOMBO1
Plug type3-Pin BS
Warranty3 years
What's Included
  • Sealey Premier Trolley Jack 3 Tonne & Axle Stands (Pair) 3 Tonne per Stand Combo

Using and looking after it

Always read the manufacturer’s instructions before use.

Using it safely
  • A trolley jack lifts; it does not support. Never get under a vehicle held only by a jack. Lower it onto correctly rated axle stands, used in pairs, before any work.
  • Work on a hard, level surface, with the handbrake on and the wheels chocked.
  • Lift only at the vehicle maker's recommended lifting points, with the lifting point centred on the saddle.
  • Never move the vehicle on the jack, and don't jack it where there is a risk of fuel, battery acid or other dangerous spills.
  • Top up only with hydraulic jack oil, never brake fluid, and have the hydraulics repaired only by a qualified person.
Typical Applications
  • Vehicle and van servicing
  • Tyre and brake work
  • Fleet maintenance
  • Light plant maintenance

Buying guide

Choosing the right trolley jack
  • Capacity. Choose a jack rated for more than the load you will lift, and never exceed its rated capacity.
  • Minimum saddle height. The saddle must fit under the vehicle's lifting point when the jack is fully lowered. Low-profile and short-chassis jacks suit lowered cars and tight spaces.
  • Maximum lift height. The jack must raise the vehicle high enough to fit axle stands underneath.

Questions and answers

Q: What is the plug type of the 3040AGCOMBO1?

A: The 3040AGCOMBO1 has a plug type of 3-Pin BS. The full figures are in the specifications.

Q: Will it fit under my vehicle?

A: Check the minimum height in the specifications against the vehicle's ground clearance at the jacking point.

Q: What warranty does it come with?

A: It comes with a 3-year Sealey warranty against manufacturing defects. Normal wear and tear and misuse are not covered.

Have a question about this product?Ask a question

More in Trolley Jacks

View all →