Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Sealey Viking Professional Long Reach Air/Manual Operation Trolley Jack with Rocket Lift 10 Tonne – 10001A
1 / 4

Sealey Viking Professional Long Reach Air/Manual Operation Trolley Jack with Rocket Lift 10 Tonne 10001A

Part no. 10001A
£1,124.94£937.45Inc VATEx VAT
£937.45 ex VAT£1,124.94 inc VAT ·

About this item

  • 10 tonne capacity
  • Length: 1507 mm
  • Maximum chassis height: 230 mm

Product description

The Sealey 10001A is a Viking professional long reach Air/Manual operation trolley jack with rocket lift 10 tonne, with a length of 1507 mm and a maximum chassis height of 230 mm.

Trolley jacks roll under the load on castors and lift quickly, which makes them the everyday choice for vehicle and light plant work.

You'll find the rest of the range in our trolley jacks section. Pair it with our axle stands to support the vehicle once it is raised, and our wheel chocks and ramps to stop it rolling.

Key Features
  • 10 tonne capacity
  • Length: 1507 mm
  • Maximum chassis height: 230 mm
  • Rocket Lift reaches the load in fewer pumps
  • 3-year Sealey warranty

Specifications

Product code10001A
Capacity10 tonne
Consumable partsReplacement Rubber Jack Pad - JP31 or JP04
Length1507 mm
Maximum chassis height230 mm
Maximum saddle height650 mm
Minimum saddle height160 mm
Weight117.4 kg
Min air pressure110 psi
max air pressure120 psi
Warranty informationBacked by our 3-year guarantee, in addition to your statutory rights. Guarantee excludes general wear, tear and misuse. <a href="https://www.sealey.co.uk/guarantee" target="_blank">See full guarantee terms</a> for details.
Warranty3 years
What's Included
  • Sealey Viking Professional Long Reach Air/Manual Operation Trolley Jack with Rocket Lift 10 Tonne
  • Instructions and parts diagram (download below)

Documents (3)

View on this page or download.

PDFInstructions
PDF document
PDFParts diagram
PDF document
PDFSafety data sheet
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Using it safely
  • A trolley jack lifts; it does not support. Never get under a vehicle held only by a jack. Lower it onto correctly rated axle stands, used in pairs, before any work.
  • Work on a hard, level surface, with the handbrake on and the wheels chocked.
  • Lift only at the vehicle maker's recommended lifting points, with the lifting point centred on the saddle.
  • Never move the vehicle on the jack, and don't jack it where there is a risk of fuel, battery acid or other dangerous spills.
  • Top up only with hydraulic jack oil, never brake fluid, and have the hydraulics repaired only by a qualified person.
Typical Applications
  • Vehicle and van servicing
  • Tyre and brake work
  • Fleet maintenance
  • Light plant maintenance

Buying guide

Choosing the right trolley jack
  • Capacity. Choose a jack rated for more than the load you will lift, and never exceed its rated capacity.
  • Minimum saddle height. The saddle must fit under the vehicle's lifting point when the jack is fully lowered. Low-profile and short-chassis jacks suit lowered cars and tight spaces.
  • Maximum lift height. The jack must raise the vehicle high enough to fit axle stands underneath.

Questions and answers

Q: What is the maximum chassis height of the 10001A?

A: The 10001A has a maximum chassis height of 230 mm. The full figures are in the specifications.

Q: Will it fit under my vehicle?

A: Check the minimum height in the specifications against the vehicle's ground clearance at the jacking point.

Q: What warranty does it come with?

A: It comes with a 3-year Sealey warranty against manufacturing defects. Normal wear and tear and misuse are not covered.

Have a question about this product?Ask a question

More in Trolley Jacks

View all →