The STAHL CraneSystems STB is the big bag version of the STD dual electric chain hoist, designed for big bags (FIBCs) and other bulky loads up to 3,200 kg.
Its special feature is a freely chosen distance between the chain hoist and the load hook.
That lets a bulky bag or big bag beam be lifted right up to the top hook position without catching on the trolley, the chain hoist or the chain box, so you get the full height of your building for filling and discharge. This is an enquiry-only product: send us your bag and station details and we will quote.
Capacity up to 3,200 kg. Hook distance, lifting speed, lift height and suspension are set to your bag size and station. Standard supply 380 to 415 V 50 Hz, IP55 (IP66 optional), pole-changing hoist motor 1:4 with frequency control optional. See the STAHL ST chain hoist brochure and datasheet (Datasheets).
For hygienic and harsh environments the ST programme can be specified with IP66 hoists and controls, anti-condensation heaters, stainless steel components, acid and alkali-resistant parts, food-approved lubricants and special paints, drip pans and trays, and electronic swing damping.
| Item | Standard | Optional |
|---|---|---|
| Ambient temperature | -20 °C to +40 °C | Up to +80 °C |
| Protection (EN 60529) | IP55 | IP66 |
| Paint | Greyish black / yellow-green RAL 7021/6018, 60 to 80 µm polyurethane | Any RAL colour, 120 to 240 µm epoxy-resin base |
| Control pendant | With EMERGENCY STOP, 2-step buttons, IP65 | Magnetek radio (pushbutton or joystick), RadioMOVEit |
| Control | Contactor control including main contactor | Crane manufacturer's control without main contactor and transformer; direct control (ST 05 to ST 20) |
| Hoist motor control | Pole-changing, ratio 1:4 | Frequency controlled, ratio 1:10 |
| Travel speed (50 Hz) | 20 m/min | 2.5/10 up to 10/40 m/min; 4 to 40 m/min frequency controlled |
| Supply voltage (50 Hz) | 380 to 415 V (ST 05 also 380 to 400 V or 415 V) | All voltages |
| Load chain | Grade 8 to DIN 5684, galvanised, safety factor 5 or more | Stainless steel or blackened manganese-phosphated |
| Chain guide | Grey cast iron EN GJS | Sandwich guide of hardened spring steel plates |
| Load lifting | Load hook in bottom hook block | Thread bar, VAGH safety hook, galvanised or stainless hook |
| Limit switches | Not included | Operational hoist limit switch; gear-type limit switch; travel limit switch |
| Overload cut-off | Slipping clutch | Load sensor; SMC Multicontroller or safety PLC |
| Hoist brake | Monodisc spring-loaded brake, asbestos-free lining | Manual brake release; bypass brake; double brake |
| Signals and display | Not included | Horn, flashing light; SLD large-format load display |
| Panel box | Plastic | Sheet steel or stainless steel (ST 10 to ST 60) |
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
Two synchronised chains, as on the STD, carry a big bag beam below the hoist. Because the hook can be set well below the hoist body, the top of the bag clears the trolley and chain box when the beam reaches the top hook position.
Synchronous chain guides give smooth, vibration-free lifting and lowering.
The patented chain guide is solid cast iron, and the anchorage and load-bearing parts are built into it. The hoist hangs directly from this casting, so the load is carried at the point where it engages and the force does not pass through the housing.
The case-hardened chain sprocket works with optimised return sheaves for low chain wear, and the overmounted shaft bearing means the sprocket can be inspected and replaced simply.
Powerful hoisting motors with a high duty cycle and number of starts, fan-cooled as standard. The asbestos-free electromagnetic disc brake has an oversized braking torque, is fully enclosed against humidity, vapour and dust, and its pad condition can be checked and measured.
On ST 10 to ST 60 the overload slipping clutch runs in the oil bath of an oversized helical gearbox and is adjustable from outside, so no electronic limiting is needed.
Grade 8 load chain to DIN 5684, surface-hardened, galvanised and generously sized, with a safety factor of at least 5. Stainless steel or blackened manganese-phosphated chain is available.
Chain boxes come in plastic as standard, or sheet steel, textile or stainless steel.
A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.
A: The filled weight, the bag height including loops, the beam you use, and the height of the filling or discharge station.
A: Yes. The ST programme is available in explosion-protected design for dust Zone 21 and Zone 22. Tell us your zone when you enquire.








Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
STAHL CraneSystems makes wire rope hoists, chain hoists, winches and crane components in Künzelsau, Germany. The business traces back to a workshop founded in Stuttgart in 1876 and is known for explosion-protected lifting equipment. It has been part of Columbus McKinnon (CMCO) since 2017.
See all STAHL products →