Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
STAHL CraneSystems STF Frequency-Controlled Chain Hoist
1 / 2

STAHL CraneSystems STF Frequency-Controlled Chain Hoist

Part no. STAHL-STF-CHAIN-HOIST
Price
Price on application
Tell us what you need and we will come back with a quote the same working day.

About this item

  • Magnetek IMPULSE G+ Mini frequency inverter as standard
  • Stepless lifting and travel for precise positioning
  • Overspeed and standstill monitoring, 1024 PPR encoder

Product description

The STAHL CraneSystems STF is the frequency-controlled version of the ST electric chain hoist, equipped as standard with a Magnetek IMPULSE G+ Mini inverter.

It gives infinitely variable speed for precise lifting and positioning, with greater operator safety and less stress on the crane's structure, mechanics and controls.

The ST 10 to ST 60 series can be built this way, and the inverter connects to Modbus, Profibus or Ethernet fieldbus systems and IoT networks, making the STF a step towards Industry 4.0.

This is an enquiry-only product: tell us your load and application and we will quote.

Key Features
  • Magnetek IMPULSE G+ Mini inverter as standard, frequency control at a ratio of 1:10
  • Overspeed protection: stops the motor exceeding its permitted speed if the drive malfunctions
  • Standstill monitoring (SRC rotation control): if unintended movement is detected, such as a slipping brake under load, the drive stops and the hoist cannot be operated until the fault is cleared
  • 1024 PPR encoder with simplified mounting for reliable feedback in rugged use
  • Diagnostic and status data over fieldbus and IoT networks
  • Hard-wired control elements rather than board controls, for durability and easy maintenance
  • Quick programming and plug-and-play commissioning

Specifications

Hoist seriesST 10 to ST 60 (see frame table below)
InverterMagnetek IMPULSE G+ Mini; stationary, monorail, double rail and underslung trolleys
Ambient temperature-10 °C to +40 °C, optionally up to +50 °C
ProtectionIP54; IP65/IP66/IP67 options for outdoor use (braking resistor optionally IP67)
SupplyAll available mains voltages
FieldbusModbus, Profibus, Ethernet
Encoder1024 PPR
ControlsPendant or Magnetek radio remote control (pushbutton or joystick)
Frame Load capacity range Note
ST 05 125 to 630 kg
ST 10 500 to 1,000 kg
ST 20 1,000 to 2,000 kg
ST 30 1,250 to 3,200 kg
ST 32 1,250 to 3,200 kg
ST 50 2,500 to 5,000 kg Some trolley options 1/1 reeving only in the standard range
ST 60 3,200 to 6,300 kg Some trolley options 1/1 reeving only in the standard range
Inverter Functions
Function Lifting Travel
Short-circuit protection Standard
Phase failure detection (keeps the load safe) Standard
Generative braking Standard
Rotary encoder feedback (SRC) Standard
Safe Operating Windows Standard Standard
Safe shutdown (redundant hardware circuit) Optional Optional
Motor thermal overload protection Standard
Autotuning Standard
Sway control Optional
Micro-Speed Optional

Inverter safety: EN 61800-5-2, EN 61508, SIL2 with hardware-supported block circuit.

Standard and Optional Equipment (ST Programme)
Item Standard Optional
Ambient temperature -20 °C to +40 °C Up to +80 °C
Protection (EN 60529) IP55 IP66
Paint Greyish black / yellow-green RAL 7021/6018, 60 to 80 µm polyurethane Any RAL colour, 120 to 240 µm epoxy-resin base
Control pendant With EMERGENCY STOP, 2-step buttons, IP65 Magnetek radio (pushbutton or joystick), RadioMOVEit
Control Contactor control including main contactor Crane manufacturer's control without main contactor and transformer; direct control (ST 05 to ST 20)
Hoist motor control Pole-changing, ratio 1:4 Frequency controlled, ratio 1:10
Travel speed (50 Hz) 20 m/min 2.5/10 up to 10/40 m/min; 4 to 40 m/min frequency controlled
Supply voltage (50 Hz) 380 to 415 V (ST 05 also 380 to 400 V or 415 V) All voltages
Load chain Grade 8 to DIN 5684, galvanised, safety factor 5 or more Stainless steel or blackened manganese-phosphated
Chain guide Grey cast iron EN GJS Sandwich guide of hardened spring steel plates
Load lifting Load hook in bottom hook block Thread bar, VAGH safety hook, galvanised or stainless hook
Limit switches Not included Operational hoist limit switch; gear-type limit switch; travel limit switch
Overload cut-off Slipping clutch Load sensor; SMC Multicontroller or safety PLC
Hoist brake Monodisc spring-loaded brake, asbestos-free lining Manual brake release; bypass brake; double brake
Signals and display Not included Horn, flashing light; SLD large-format load display
Panel box Plastic Sheet steel or stainless steel (ST 10 to ST 60)

Documents (3)

View on this page or download.

PDFSTAHL ST Chain Hoist Brochure (2025)
PDF document
PDFSTAHL ST Chain Hoist Datasheet
PDF document
PDFSTAHL STF Chain Hoist Product Announcement
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Assembly and machine loading where loads must be placed accurately
  • Production lines linked to plant control systems
  • Delicate or high-value loads that need smooth starts and stops
  • Clean rooms and medical technology, with stainless and drip-pan options

Buying guide

How It Works

The inverter controls motor speed directly, so the load can be crept into position and accelerated smoothly. Braking is generative, with the mechanical brake used only for holding and emergencies, which reduces lining wear.

The inverter continuously watches environment and function parameters to keep the hoist inside safe limits, and its softkey display makes parameter selection and fault diagnosis straightforward. Parameters can be backed up and copied between hoists.

Design & Construction

Chain drive

The patented chain guide is solid cast iron, and the anchorage and load-bearing parts are built into it. The hoist hangs directly from this casting, so the load is carried at the point where it engages and the force does not pass through the housing.

The case-hardened chain sprocket works with optimised return sheaves for low chain wear, and the overmounted shaft bearing means the sprocket can be inspected and replaced simply.

Motor, brake and gearbox

Powerful hoisting motors with a high duty cycle and number of starts, fan-cooled as standard. The asbestos-free electromagnetic disc brake has an oversized braking torque, is fully enclosed against humidity, vapour and dust, and its pad condition can be checked and measured.

On ST 10 to ST 60 the overload slipping clutch runs in the oil bath of an oversized helical gearbox and is adjustable from outside, so no electronic limiting is needed.

Chain and chain box

Grade 8 load chain to DIN 5684, surface-hardened, galvanised and generously sized, with a safety factor of at least 5. Stainless steel or blackened manganese-phosphated chain is available.

Chain boxes come in plastic as standard, or sheet steel, textile or stainless steel.

Questions and answers

Q: How do I get a price?

A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.

Q: Why choose an STF over a two-speed ST?

A: If you need stepless, precise positioning, smoother starts and stops, or diagnostic data for your plant systems. For general handling a two-speed ST hoist is usually enough.

Q: What happens if the brake slips under load?

A: The STF detects the unintended movement, stops the drive and locks out operation until the fault has been dealt with.

Have a question about this product?Ask a question

More in Electric Chain Hoists

View all →