Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
STAHL CraneSystems STK Extra Short Headroom Chain Hoist
1 / 3

STAHL CraneSystems STK Extra Short Headroom Chain Hoist

Part no. STAHL-STK-CHAIN-HOIST
Price
Price on application
Tell us what you need and we will come back with a quote the same working day.

About this item

  • 500 kg to 5,000 kg on a patented extra short headroom trolley
  • Headroom cut by over 60 %: just 210 mm beam to hook at 5,000 kg
  • Two synchronised chains for a steady, swing-free lift

Product description

The STAHL CraneSystems STK is the ST electric chain hoist built into STAHL's patented extra short headroom trolley.

It is made for buildings where every millimetre of lifting height matters: compared with a standard headroom trolley, the headroom is reduced by more than 60 %. The distance from the underside of the beam to the bed of the hook is just 210 mm at 5,000 kg, and 185 mm at 1,600 kg and 3,200 kg.

The hoists inside the trolley are mounted vertically and come from the standard ST chain hoist programme, so you get the same proven drive, brake and chain technology in a far lower package.

Six standard versions cover 500 kg to 5,000 kg. This is an enquiry-only product: send us your beam size, load and lift and we will quote.

Key Features
  • Headroom reduced by more than 60 % against a standard trolley, for maximum hook path in low buildings
  • Patented chain guide: two separate chains run in sync onto one bottom hook block, so the load lifts without swinging or vibrating
  • Hook beam adjusts steplessly to the runway flange width
  • No projecting edges on the trolley, for steady cross travel
  • Low deadweight and low maintenance
  • Permanent electronic monitoring of the suspended load
  • Magnetek frequency inverters for lifting and travel, and Magnetek radio controls, available
  • Explosion-protected versions to ATEX, IECEx, NEC, CEC, INMETRO and TC RU

Specifications

Type A B (beam to hook) C D
STK 0502-8/2 2/2-1 260 mm 136 mm 565 mm 264 mm
STK 0502-8/2 4/2-1 490 mm 151 mm 750 mm 290 mm
STK 3016-8/2 2/2-1 520 mm 185 mm 800 mm 300 mm
STK 5025-8/2 2/2-1 580 mm 210 mm 910 mm 330 mm
STK 3016-8/2 4/2-1 520 mm 185 mm 800 mm 300 mm
STK 5025-8/2 4/2-1 580 mm 210 mm 910 mm 330 mm

Dimensions are approximate and refer to the STK drawing in the STAHL ST chain hoist brochure (see Datasheets). Supply 380 to 415 V 50 Hz as standard, other voltages available. Made by STAHL CraneSystems (Columbus McKinnon group) using Kanban production for fast availability.

How the Headroom Is Saved

STAHL offers two low-headroom builds. In the short headroom trolley, the chain hoist body is mounted at an angle so no return sheave is needed, which cuts headroom by 33 %.

The STK extra short headroom trolley goes further: the hoists are mounted vertically beside the beam and two chains run in perfect sync down to a single bottom hook block. That arrangement is unique to STAHL and is what achieves the 60 %+ reduction while keeping the hook level.

Options
  • Operational hoist limit switch: cut-off at top, or top and bottom hook position, triggered by the bottom hook block
  • Gear-type limit switch for routine stops at top or bottom and fast-to-slow switching before the stops (IP55, IP66 optional)
  • SMC Multicontroller: continuous load monitoring even when idle, ALC automatic load control, load spectrum memory and operating data logging with PC data exchange
  • SLD load display, four or six digits, 100 or 150 mm high, with CAN and other interfaces
  • Bypass brake acting directly on the load (bypassing the slipping clutch), or a second motor brake
  • Spring-steel chain guide and enclosed chain guide for rugged duty
  • Magnetek radio controls to EN ISO 13849-1 PL d, with ATEX/IECEx versions
Standard and Optional Equipment (ST Programme)
Item Standard Optional
Ambient temperature -20 °C to +40 °C Up to +80 °C
Protection (EN 60529) IP55 IP66
Paint Greyish black / yellow-green RAL 7021/6018, 60 to 80 µm polyurethane Any RAL colour, 120 to 240 µm epoxy-resin base
Control pendant With EMERGENCY STOP, 2-step buttons, IP65 Magnetek radio (pushbutton or joystick), RadioMOVEit
Control Contactor control including main contactor Crane manufacturer's control without main contactor and transformer; direct control (ST 05 to ST 20)
Hoist motor control Pole-changing, ratio 1:4 Frequency controlled, ratio 1:10
Travel speed (50 Hz) 20 m/min 2.5/10 up to 10/40 m/min; 4 to 40 m/min frequency controlled
Supply voltage (50 Hz) 380 to 415 V (ST 05 also 380 to 400 V or 415 V) All voltages
Load chain Grade 8 to DIN 5684, galvanised, safety factor 5 or more Stainless steel or blackened manganese-phosphated
Chain guide Grey cast iron EN GJS Sandwich guide of hardened spring steel plates
Load lifting Load hook in bottom hook block Thread bar, VAGH safety hook, galvanised or stainless hook
Limit switches Not included Operational hoist limit switch; gear-type limit switch; travel limit switch
Overload cut-off Slipping clutch Load sensor; SMC Multicontroller or safety PLC
Hoist brake Monodisc spring-loaded brake, asbestos-free lining Manual brake release; bypass brake; double brake
Signals and display Not included Horn, flashing light; SLD large-format load display
Panel box Plastic Sheet steel or stainless steel (ST 10 to ST 60)

Documents (2)

View on this page or download.

PDFSTAHL ST Chain Hoist Brochure (2025)
PDF document
PDFSTAHL ST Chain Hoist Datasheet
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Single girder overhead and suspension cranes in low-ceilinged halls
  • Plastic casting and moulding shops (STAHL cites an STK with ST 50 hoists at up to 5,000 kg in a low casting hall)
  • Cold rooms and other space-limited process areas
  • Upgrading an existing runway to gain lifting height without raising the building

Buying guide

Choosing the Right Model

Pick by capacity, then check the speed and number of falls. Two-fall versions lift twice as fast as four-fall versions at the same motor size.

Type Capacity Falls Hoisting speed (50 Hz) Hoisting speed (60 Hz) Motor (50 Hz) Motor (60 Hz)
STK 0502-8/2 2/2-1 500 kg 2 8 / 2 m/min 10 / 2.5 m/min 0.8 / 0.2 kW 0.96 / 0.24 kW
STK 0502-8/2 4/2-1 1,000 kg 4 4 / 1 m/min 5 / 1.2 m/min 0.8 / 0.2 kW 0.96 / 0.24 kW
STK 3016-8/2 2/2-1 1,600 kg 2 8 / 2 m/min 10 / 2.5 m/min 2.3 / 0.57 kW 2.8 / 0.68 kW
STK 5025-8/2 2/2-1 2,500 kg 2 8 / 2 m/min 10 / 2.5 m/min 3.8 / 0.9 kW 4.6 / 1.1 kW
STK 3016-8/2 4/2-1 3,200 kg 4 4 / 1 m/min 5 / 1.2 m/min 2.3 / 0.57 kW 2.8 / 0.68 kW
STK 5025-8/2 4/2-1 5,000 kg 4 4 / 1 m/min 5 / 1.2 m/min 3.8 / 0.9 kW 4.6 / 1.1 kW

Other hoisting speeds, a gear limit switch and explosion-protected designs are available on request. An FMD1 slipping clutch test device (full metal, ±2 % accuracy, up to 4,000 kg on one fall) is optionally available for the STK.

Design & Construction

Chain drive

The patented chain guide is solid cast iron, and the anchorage and load-bearing parts are built into it. The hoist hangs directly from this casting, so the load is carried at the point where it engages and the force does not pass through the housing.

The case-hardened chain sprocket works with optimised return sheaves for low chain wear, and the overmounted shaft bearing means the sprocket can be inspected and replaced simply.

Motor, brake and gearbox

Powerful hoisting motors with a high duty cycle and number of starts, fan-cooled as standard. The asbestos-free electromagnetic disc brake has an oversized braking torque, is fully enclosed against humidity, vapour and dust, and its pad condition can be checked and measured.

On ST 10 to ST 60 the overload slipping clutch runs in the oil bath of an oversized helical gearbox and is adjustable from outside, so no electronic limiting is needed.

Chain and chain box

Grade 8 load chain to DIN 5684, surface-hardened, galvanised and generously sized, with a safety factor of at least 5. Stainless steel or blackened manganese-phosphated chain is available.

Chain boxes come in plastic as standard, or sheet steel, textile or stainless steel.

Questions and answers

Q: How do I get a price?

A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.

Q: How much lifting height will I gain?

A: Against a standard headroom trolley, the STK reduces headroom by more than 60 %. At 5,000 kg the beam-to-hook distance is about 210 mm. Send us your current hoist and building height and we will compare.

Q: Will the load swing or tilt with two chains?

A: No. Both chains run in sync onto one bottom hook block, so the load lifts and lowers steadily without swinging or vibrating.

Have a question about this product?Ask a question

More in Electric Chain Hoists

View all →