Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Titan Grade 8 High Tensile Lifting Eyenut
1 / 6

Titan Grade 8 High Tensile Lifting Eyenut

Part no. T-055/6
£2.09£1.74Inc VATEx VAT
£1.74 ex VAT£2.09 inc VAT ·
Thread / Connection: M6

About this item

  • Forged lifting eyenut that screws onto a threaded stud or bolt, M6 to M48
  • SWLs given at 0° and 90°, from 0.4t / 0.15t up to 32t / 12t
  • Useful where equipment has studs rather than tapped holes

Product description

The Titan T-055 is a forged Grade 8 high tensile eyenut that screws onto a threaded stud or bolt, giving equipment a lifting point where there is no tapped hole.

A safe working load is given for a straight pull (0 degrees) and for a side pull (90 degrees) on every size from M6 to M48.

Key Features
  • Forged alloy steel, heat treated
  • SWL given at 0° and 90° for each size
  • Proof load tested to 2.5 x working load
  • 100% magnetic particle crack detection
  • Temperature range -40°C to +200°C
  • Sold individually

Specifications

Choose a size above to see its specifications.

Compare all 12 sizes
Part code Thread D (mm) N (mm) L (mm) SWL 0° (t) SWL 90° (t) Weight (kg)
T-055/6 M6 36 20 36 0.4 0.15 0.049
T-055/8 M8 36 20 36 1 0.4 0.05
T-055/10 M10 45 25 45 1 0.4 0.09
T-055/12 M12 54 30 53 2 0.75 0.16
T-055/14 M14
T-055/16 M16 63 35 62 4 1.5 0.24
T-055/20 M20 63 35 62 6 2.3 0.36
T-055/24 M24 72 40 71 8 3.2 0.72
T-055/30 M30 72 40 71 12 4.5 1.32
T-055/36 M36 81 45 81 16 7 2.08
T-055/42 M42 90 50 90 24 9 3.11
T-055/48 M48 90 50 90 32 12 5.02

Documents (1)

View on this page or download.

PDFDatasheet
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Motors, gearboxes and pumps
  • Transformers and electrical equipment
  • Moulds, dies and plates
  • Fabrications with threaded studs or bolts

Questions and answers

Q: Which SWL should I use?

A: Use the figure for the direction the sling will pull. The 90 degree figure is far lower than the 0 degree figure, so plan angled lifts around it.

Q: Eyenut or eyebolt?

A: An eyenut fits a protruding stud or bolt. If the load has a tapped hole, use a matching eyebolt instead.

Q: How often must it be examined?

A: As a lifting accessory it needs a thorough examination by a competent person at least every 6 months under LOLER 1998, plus a check before each use. Withdraw it after any overload.

Have a question about this product?Ask a question

More in Lifting Points

View all →