Ratchet Lever Hoists
Ratchet lever hoists for lifting, pulling and tensioning in confined spaces. Capacities from 250kg to 10 tonnes, all with a test certificate, including Yale UNOplus and PUL-LIFT models. For straight vertical lifts over longer heights, a hand chain hoist is usually the better choice. Short-term job? Hire a hoist by the week.
- Products
- 25
- Brands
- Yale, KITO +4
- Price from
- £59
- Certification
- ✓ UKCA & CE
Ratchet Lever Hoists
Lever hoist or chain block
A ratchet lever hoist, often called a pull lift, is worked by swinging a short lever. It lifts, pulls and tensions in any direction, so it is the tool for drawing machinery into position, pulling pipe sections together or holding a load while it is fixed. Yale states that its lever hoists over 750kg can also be used to secure loads under EN 12195, the load restraint standard.
For a straight vertical lift over a longer height, a hand chain hoist is quicker and easier to work from the floor.
Choosing a model
Most of the hoists on this page are Yale. Each range is aimed at a different kind of work.
| Range | Capacity on this page | Choose it for |
|---|---|---|
| Yalehandy | 250kg and 500kg | Light pulls and a tool bag hoist |
| Yale AL | 750kg to 3,000kg | Carrying between jobs and on service vans |
| Yale UNOplus-A | 750kg to 6,000kg | General site and workshop use |
| YaleERGO 360 | 750kg to 9,000kg | Frequent use and awkward working positions |
| YaleERGO 360 UT | 1,500kg to 9,000kg | Overhead line and utility work |
| Yale C85 and D85 PUL-LIFT | 750kg to 10,000kg | Heavy industrial, mining and shipyard work |
| Viper HSH-X | 250kg to 9,000kg | General lifting and pulling |
- Yale AL: aluminium housing, lever and hand wheel. At Yale's 1.5m standard lift, the AL 3000 weighs 18kg and needs 28daN on the lever at full load.
- Yale UNOplus-A: a compact stamped steel body. The Arctic Edition is rated to -40 degrees Celsius for cold stores and winter work.
- YaleERGO 360: a snap crank built into the lever gives a 360 degree working range. Yale says it needs up to 30% less pull force and works up to 12 times faster than a conventional ratchet lever hoist.
- YaleERGO 360 UT: adds a patented automatic safety gear. If the load brake fails and the chain runs too fast, it locks and holds the load.
- Yale C85 and D85: malleable cast iron housing and bottom block. The C85 runs on roller chain, and the D85 on link chain.
Free chaining and overload protection
The Yalehandy, AL, UNOplus-A and YaleERGO 360 have a free chaining device as standard. It lets you pull chain through the hoist by hand in either direction, so you can take up slack and hook on before you start ratcheting.
A slip clutch is available as an option on the YaleERGO 360 and on every C85 and D85 except the 10 tonne model. Yale presets it to slip at about 25% overload, plus or minus 15%, so the hoist cannot lift a load well over its rating. Never extend the lever with a tube to get more force. If the load does not move with the standard lever, use a larger hoist.
ATEX zones
Standard lever hoists must not be used in explosive atmospheres. The Yale UNOplus-A ATEX and C/D 85 ATEX Mining hoists are built for these areas and are also listed on our ATEX lever hoists page. Tell us your zone classification when you order.
Chain length and examination
Yale quotes its AL and UNOplus hoists with a 1.5m standard lift. Order a longer chain if your lift or pull needs it, but allow for the extra weight you will carry. Under LOLER, a lever hoist used for lifting is lifting equipment and needs a thorough examination at least every 12 months, unless a written examination scheme sets a different interval. Slings and shackles used with it are lifting accessories and need examining every six months.
What is the difference between a lever hoist and a chain hoist?
A lever hoist is worked by a short ratchet lever and can lift, pull or tension in any direction. A hand chain hoist is worked by pulling a hand chain from below and is better for longer straight vertical lifts.
Can a lever hoist be used horizontally?
Yes. A ratchet lever hoist works vertically, horizontally or at an angle, which is why it is used for pulling, tensioning and positioning. Yale states its lever hoists over 750kg can also be used for load securing to EN 12195.
What is a pull lift?
Pull lift is a common name for a ratchet lever hoist, taken from Yale's PUL-LIFT range. The Yale C85 and D85 PUL-LIFT models on this page run from 750kg to 10,000kg.
Can I put an extension on a lever hoist handle?
No. Extending the lever overloads the hoist mechanism and chain. If the load will not move with the standard lever, use a hoist with a higher capacity.
What lift height does a lever hoist have?
Yale quotes its AL and UNOplus lever hoists with a 1.5m standard lift. Longer chain can be ordered if your lift or pull needs more.
How often does a lever hoist need a thorough examination?
Under LOLER, a lever hoist used for lifting needs a thorough examination at least every 12 months, unless a written examination scheme sets a different interval.
Which brands do you stock for Ratchet Lever Hoists?
What else is in Hoists and Trolleys?
Related ranges include Hand Chain Hoists, Chain Hoist Accessories, Trolleys & Trolley Clamps, Pneumatic Chain Hoists, Electric Chain Hoists and Electric Wire Rope Hoists.