The 13 mm Grade 8 lashing chain is a made-up chain assembly for tying down loads on trucks, trailers and low loaders.
It is the heaviest size, for large plant, heavy machinery and dense steel loads where the restraint calculation needs more than 8 mm or 10 mm chain can give.
It is made up to an effective working length (EWL) from 1 m to 10 m in 1 m steps, with a choice of five end fitting combinations. Tension it with a 13 mm lever or ratchet loadbinder, bought separately. For load restraint only, not lifting.
Pair it with a 13 mm binder such as the Titan Grade 8 lever binder, or choose 10 mm lashing chain for lighter loads.
Always read the manufacturer’s instructions before use.
Follow the route the chain will take from the lashing point on the deck to the point on the load, then add enough chain for the loadbinder to take up. Many operators carry a mix of lengths.
A: Effective working length: the usable length from the bearing point of one fitting to the bearing point of the other.
A: No. You need a separate lever or ratchet loadbinder for 13 mm chain.
A: That depends on the load weight, lashing angles and friction between load and deck. BS EN 12195-1 sets out the calculation. Plant is usually secured at each corner with lashings working in opposing directions.
A: Only with fittings designed for the job. Never knot chain or join links with bolts or wire.
A: No. It is for load restraint only. Use a chain sling built and rated for lifting.


Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account