Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Green Pin BigMouth® Bow Shackle with Safety Nut and Bolt Pin – GPWM
1 / 6

Green Pin BigMouth Bow Shackle with Safety Nut and Bolt Pin GPWM

Part no. GPWM4.75
Weekly hire
From £21.54/wkFrom £17.95/wkInc VATEx VAT
From £17.95/wk ex VATFrom £21.54/wk inc VAT ·
Size: 4.75t
Hire cannot start on days highlighted with a dotted border.
Total: £ ()
Excluding any selected add-ons
Hire return within days

About this item

  • Wide mouth bow shackle with safety nut and bolt pin, WLL 4.75t to 75t
  • Grade 8 quenched and tempered alloy steel, conforms to ASME B30.26
  • Hot dipped galvanised, minimum breaking load 6 x WLL, -20°C to +200°C

Product description

The Green Pin BigMouth bow shackle (GPWM) has an extra wide mouth that takes wide slings, large hooks and thick fittings that will not fit a standard shackle.

It is Grade 8 alloy steel with a safety nut and bolt pin, from 4.75 t to 75 t. See our chain and fittings for the rest of the rig.

Key Features
  • Wide mouth for large slings and fittings
  • Grade 8 alloy steel, hot dipped galvanised; ask us to confirm the applicable standard
  • Minimum breaking load 6 x W.L.L.; -20°C to +200°C

Specifications

Choose a size above to see its specifications.

Compare all 10 sizes
Code W.L.L. (t) A B C D E H Weight (kg)
GPWM4.75 4.75 22 25 52 22 63 173 2.08
GPWM6.5 6.5 25 28 59 25 75 204 3.14
GPWM8.5 8.5 28 32 66 28 82 225 4.43
GPWM9.5 9.5 32 35 72 32 90 248 5.95
GPWM12 12 35 38 79 35 100 274 7.87
GPWM16 16 38 42 88 38 106 319 10.2
GPWM25 25 45 50 103 45 127 370 17
GPWM30 30 50 57 112 50 146 411 23.6
GPWM55 55 65 70 145 65 165 487 45
GPWM75 75 83 83 164 83 184 537 70

Dimensions in mm.

Before you use it
  • Check it. Markings must be legible, and the body and pin must be the same brand, type and size. Look for damaged threads, distortion, wear, nicks, gouges, cracks and corrosion. Never use a shackle with a bent pin, tight threads or misaligned pin holes.
  • Fit the pin properly. Screw a collar pin in hand-tight, then tighten it with a wrench so the collar sits fully on the eye. Never use a safety bolt shackle without its cotter pin.
  • Use only the matching pin. Never replace it with any other pin or bolt.
  • Never modify it. No welding, heating, machining or bending, and no washers welded inside the eyes to narrow the jaw.
  • Keep it away from acids and other harmful chemicals.
  • Hazardous work. The WLL assumes normal conditions. For offshore work, lifting people, or molten or corrosive loads, a competent person must reduce it.
  • Inspect it at least every 6 months, more often in severe conditions.

Documents (1)

View on this page or download.

PDFGreen Pin Shackles Catalogue (Datasheet)
PDF document

Buying guide

Choosing the right Green Pin shackle

Pin type. A screw collar pin is quick to fit and remove, for lifts where the shackle is not left in place. Choose a safety bolt shackle (bolt, nut and cotter pin) where the shackle stays in place for a long time, where the load can move over the pin and turn it, or where you need maximum pin security.

Two slings on one hook. Use a bow shackle, with the slings on the bow and the pin in the hook. Put no more than two sling legs on the bow, with no more than 120° between them. Loaded evenly like this, the full WLL can be used.

Side loading. Green Pin shackles are not designed for side loads. If one cannot be avoided, the WLL must be reduced using Van Beest's side-load chart.

The ROV shackles P-5363 and P-5367 are for in-line use only, and sling shackles have their own reduction curves.

Heat. Above 200 °C the WLL must be reduced:

Temperature Usable WLL
Up to 200 °C 100%
200 to 300 °C 90%
300 to 400 °C 75%
Above 400 °C Not allowed

Questions and answers

Q: Can it be side loaded?

A: Load it along the centre line of the body, square to the pin. If side loading cannot be avoided, reduce the W.L.L. to 70% at 45° and 50% at 90°.

Q: Why a safety nut and bolt pin?

A: The bolt is secured by a nut and split pin, so it cannot unscrew. That suits long-term or permanent rigging, or any lift where the pin could rotate under load. For quick connections, our shackles range also includes screw collar pin types.

Q: How often must it be examined?

A: As a lifting accessory, a thorough examination by a competent person at least every 6 months under LOLER 1998, plus a check before each use.

Have a question about this product?Ask a question

More in Shackles

View all →