Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Honeywell Miller H500 Arc Flash Full Body Harness (Size 1)

Honeywell Miller H500 Arc Flash Full Body Harness (Size 1)

Part no. BWP-HWFPXARCM-HSEU
£253.45£211.21Inc VATEx VAT
£211.21 ex VAT£253.45 inc VAT ·
Size: choose one

About this item

  • EN 361 · EN 358 · ASTM F887-20
  • Dielectric D-rings and buckles, flame-retardant webbing
  • Back + side D-rings · max user 140 kg

Product description

The Honeywell Miller H500 Arc Flash harness (FPXARCM-HSEU, size 1) is a vest-style full body harness with a work-positioning belt, built for electrical work.

Its D-rings and buckles are dielectric (non-conductive), the polyamide webbing is flame retardant, and it is certified to EN 361 and EN 358 and tested to ASTM F887-20.

Key Features
  • Flame-retardant polyamide webbing (black/red)
  • Dielectric back D-ring for fall arrest
  • Dielectric side D-rings for work positioning
  • Polyamide front webbing loops
  • Dielectric shoulder-strap adjuster and mating buckles
  • Removable shoulder padding
  • Thick waist belt (non-removable)
  • Clearly identifiable fall impact indicators
  • Lanyard keepers and flame-retardant elastic keepers
  • Protected label pouch
  • Lightweight: 2.6 kg (size 2)

Specifications

ManufacturerHoneywell Miller
Part numberFPXARCM-HSEU (size 1)
Other sizesFPXARCM-HMEU (size 2), FPXARCM-HLEU (size 3)
StyleVest-style full body harness with belt
Attachment pointsBack D-ring (fall arrest), 2 side D-rings (work positioning), front webbing loops
D-rings and bucklesDielectric
WebbingPolyamide, flame retardant
Maximum user weight140 kg
Weight2.6 kg (size 2)
StandardsEN 361:2002, EN 358:2018, ASTM F887-20
How a fall arrest system fits together

Fall arrest equipment only works as a complete system, with every part certified for fall arrest:

Part Standard What it does
Anchor device EN 795 The secure point you connect to. Types A to E cover fixed anchors, temporary anchors such as tripods and beam clamps, flexible and rigid lifelines, and deadweight anchors.
Energy-absorbing lanyard EN 355 Limits the force on the body in a fall to no more than 6 kN. The absorber can extend by up to 1.75 m as it works.
Retractable fall arrester (fall arrest block) EN 360 The line pays out and retracts as you move, and locks if you fall, limiting the force to no more than 6 kN.
Full body harness EN 361 Connect fall arrest equipment only to the attachment points marked A.
Connectors EN 362 Karabiners and hooks that join the parts together.
Before you use it
  • Check the clearance. A fall arrest system needs enough clear space below the user for the lanyard or line, the energy absorber and the harness to extend. Use the minimum clearance in the maker's instructions, and use a retractable block where there is not enough room for a lanyard.
  • Anchor above you where possible. Use a retractable block over an edge or horizontally only if its instructions say it is tested for that use.
  • Plan the rescue. Under the Work at Height Regulations you must have a plan to rescue someone quickly after a fall, before work starts.
  • Train every user in fitting, using and checking the equipment.
  • Inspect it. Check it before every use, and have it given a detailed inspection by a competent person at least every 6 months. Withdraw any equipment that has arrested a fall, or shows cuts, wear, damaged stitching or corrosion.
Standards Explained
  • EN 361 – full body harnesses for fall arrest.
  • EN 358 – belts and lanyards for work positioning and restraint (the side D-rings).
  • ASTM F887-20 – the US standard for personal climbing equipment, which includes requirements for equipment used near electrical hazards.

Questions and answers

Q: Which lanyard goes with it?

A: Honeywell makes matching Miller Arc Flash lanyards: FPLARCM-SEU (single leg) and FPLARCM-TEU (twin leg).

Q: Can the front loops be used for fall arrest?

A: Use the attachment points only as marked on the harness label and in the Miller instructions. The back D-ring is the fall-arrest point; the side D-rings are for work positioning only.

Q: How often must it be inspected?

A: Inspect before every use and have a competent person carry out a detailed inspection at least every 6 months, or more often in harsh conditions. Withdraw it immediately if a fall indicator has deployed.

Have a question about this product?Ask a question

More in Harnesses

View all →