The J & F SOA is an open spelter socket for terminating steel wire rope at a pinned connection.
The broomed rope end is set in the socket basket with molten zinc or a suitable resin, so the load is transferred along the socketed length rather than through a clamp.
Twenty sizes cover rope from 6 mm to 102 mm, with minimum breaking loads from 4.5 t to 875 t. Sizes up to 1 1/8" are cast in ZG270-500 steel and larger sizes in ZG35CrMo or ZG42CrMo. Hot dipped galvanised.
| Product Code | Rope Dia (mm) | Rope Dia (inch) | MBL (t) | A (mm) | C (mm) | D (mm) | F (mm) | G (mm) | H (mm) | J (mm) | L (mm) | M (mm) | N (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SOA-01 | 6-7 | 1/4 | 4.5 | 115.8 | 19.1 | 18 | 9.7 | 17.5 | 39.6 | 57.2 | 40.4 | 33.3 | 9.1 | 0.5 |
| SOA-02 | 8-10 | 5/16 - 3/8 | 12 | 122.9 | 20.6 | 20 | 12.7 | 20.6 | 42.9 | 57.2 | 45.2 | 38.1 | 11.2 | 0.59 |
| SOA-03 | 11-13 | 7/16 - 1/2 | 20 | 141.2 | 25.4 | 26 | 14.2 | 23.9 | 47.8 | 63.5 | 51.8 | 47.8 | 12.7 | 1.02 |
| SOA-04 | 14-16 | 9/16 - 5/8 | 27 | 171.5 | 31.8 | 30 | 17.5 | 28.7 | 57.2 | 76.2 | 64.6 | 57.2 | 14.2 | 1.63 |
| SOA-05 | 18 | 3/4 | 43.1 | 201.7 | 38.1 | 35 | 22.4 | 31.8 | 66.6 | 88.9 | 77.3 | 66.6 | 15.8 | 2.64 |
| SOA-06 | 20-22 | 7/8 | 55 | 235 | 44.5 | 41 | 25.4 | 38.1 | 82.6 | 101.6 | 90.5 | 79.5 | 20.3 | 4.38 |
| SOA-07 | 24-26 | 1 | 78 | 268.2 | 50.8 | 51 | 28.7 | 44.5 | 95.3 | 114.3 | 101.6 | 95.3 | 22.4 | 7.03 |
| SOA-08 | 28-30 | 1 1/8 | 92.3 | 300 | 57.2 | 57 | 31.8 | 50.8 | 104.7 | 127 | 118.5 | 104.7 | 25.4 | 9.75 |
| SOA-09 | 32-35 | 1 1/4 - 1 3/8 | 136 | 335 | 63.5 | 64 | 38.1 | 57.2 | 120.7 | 139.7 | 129.7 | 120.7 | 28.7 | 14.1 |
| SOA-10 | 38 | 1 1/2 | 170 | 384 | 76.2 | 70 | 41.4 | 69.9 | 133 | 152.4 | 156.1 | 136.7 | 30.2 | 21.4 |
| SOA-11 | 40-42 | 1 5/8 | 188 | 412.8 | 76.2 | 76 | 44.5 | 76.2 | 140 | 165.1 | 168.3 | 146.1 | 33.3 | 24.9 |
| SOA-12 | 44-48 | 1 3/4 - 1 7/8 | 268 | 463.6 | 88.9 | 89 | 50.8 | 79.5 | 162 | 190.5 | 182.0 | 165.1 | 39.6 | 37.2 |
| SOA-13 | 50-54 | 2 - 2 1/8 | 291 | 546.1 | 101.6 | 95 | 57.2 | 95.3 | 188 | 215.9 | 232.8 | 177.8 | 46.0 | 59 |
| SOA-14 | 56-60 | 2 1/4 - 2 3/8 | 360 | 596.9 | 114.3 | 108 | 66.8 | 101.6 | 210 | 228.6 | 259.3 | 196.9 | 54.1 | 76 |
| SOA-15 | 64-67 | 2 1/2 - 2 5/8 | 424 | 647.7 | 127 | 120 | 73.2 | 114.3 | 235 | 247.7 | 279.4 | 215.9 | 60.5 | 114 |
| SOA-16 | 70-73 | 2 3/4 - 2 7/8 | 511 | 692.2 | 133.4 | 127 | 79.3 | 124 | 267 | 279.4 | 285.8 | 228.6 | 73.2 | 143 |
| SOA-17 | 75-80 | 3 - 3 1/8 | 563 | 736.6 | 146.1 | 133 | 85.9 | 133.4 | 282 | 304.8 | 294.2 | 241.3 | 76.2 | 172 |
| SOA-18 | 82-86 | 3 1/4 - 3 3/8 | 722 | 784.4 | 158.8 | 140 | 92 | 146.1 | 302 | 330.2 | 308 | 254 | 79.3 | 197 |
| SOA-19 | 88-92 | 3 1/2 - 3 5/8 | 779 | 844.6 | 171.5 | 152 | 98.6 | 165.1 | 315 | 355.6 | 332.4 | 273.1 | 82.6 | 255 |
| SOA-20 | 94-102 | 3 3/4 - 4 | 875 | 920.8 | 190.5 | 178 | 108 | 184.2 | 346 | 381 | 360 | 317.5 | 88.9 | 355 |
| Material | ZG270-500 steel up to 1 1/8"; ZG35CrMo or ZG42CrMo from 1 1/4" |
|---|---|
| Finish | Hot dipped galvanised |
| Socketing medium | Molten zinc or suitable resin |
| Marking | Manufacturer ID, size and traceability code |
| Brand | J & F (supplied by GT) |
You may also need: Certex Eureka Wirelock socketing resin.
Always read the manufacturer’s instructions before use.
Choose the socket whose rope range covers your rope diameter, then check the MBL in the table against the assembly. Check the jaw width (C) and pin diameter (D) against the fitting the socket will connect to.
Socketing must be carried out by specialists from a certified sling shop. For a socket with a solid eye instead of a pinned jaw, see the J & F closed spelter socket (SOC).
A: Both are used to set the broomed rope in the socket. The choice is made by the sling shop doing the socketing, following the rope and resin manufacturers' instructions.
A: The manufacturer states that a correctly assembled socket can meet at least the breaking strength of the steel wire rope. The socket MBL for each size is in the table.
A: No. Socketing is only to be carried out by specialists from a certified sling shop.
A: As a lifting accessory, it needs thorough examination by a competent person under LOLER at intervals not exceeding 6 months, and withdrawal after any overload.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
GT Lifting is the trading name of George Taylor and Company Lifting Gear, a UK supplier and maker of lifting equipment. The company was formed in 1974, but its roots go back to a blacksmith's shop in the UK, in 1832. Its own-label range includes hoists, clamps, blocks, skates and winches.
See all GT products →