In stock - ready to dispatch
The Moldex 9430 is an EasyLock A1B1E1K1P3 R combined filter for Moldex Series 7000 half masks and Series 9000 full face masks: an A1B1E1K1 gas filter with a P3 R particle filter pre-assembled on the front.
EasyLock combined filters consist of pre-assembled particulate and gas filters.
The bayonet connection ensures that they can be installed directly to the series 7000 and 9000 masks. The gas filter and particulate filter are not permanently connected and can be replaced individually as required.
Filters that have not been used up can therefore be reused. This saves costs and resources.
Each letter is a gas type: A for organic gases and vapours with a boiling point above 65 °C (most solvents), B for inorganic gases such as chlorine and hydrogen sulphide, E for acid gases such as sulphur dioxide, K for ammonia and organic ammonia derivatives, AX for low-boiling organic compounds and Hg for mercury vapour. The number is the capacity class: class 1 for concentrations up to 1,000 ppm and class 2 up to 5,000 ppm.
Gas filters do not stop dust; add a P filter where particles are also present.
EN 143 classes particle filters by efficiency: P1 at least 80%, P2 at least 94% and P3 at least 99.95%. R means the filter is reusable for more than one shift.
Under HSE guidance HSG53, a half mask with P2 filters has an assigned protection factor of 10 and with P3 filters 20; a full face mask with P3 filters has 40.
View on this page or download.
Reusable half masks (EN 140) and full face masks (EN 136) protect only when fitted with the right filter. Filters are colour coded by what they stop:
| Code | Colour | Protects against |
|---|---|---|
| A | Brown | Organic gases and vapours with a boiling point above 65 °C, such as many solvents |
| AX | Brown | Low-boiling organic vapours (65 °C or below) |
| B | Grey | Inorganic gases such as chlorine and hydrogen sulphide |
| E | Yellow | Acid gases such as sulphur dioxide |
| K | Green | Ammonia and its derivatives |
| P1, P2, P3 | White | Dust, mist and fumes (particles), with P3 the most efficient |
A gas filter's number (1, 2 or 3) shows its capacity, with 3 the highest. Combined filters, such as A2P3, protect against gases and particles together. Your COSHH assessment and the product's safety data sheet set the filter you need.
A: Yes. Moldex does not permanently join the gas and particle filters, so either part can be replaced separately when it is used up – fit a 9030 P3 particle filter or a 9400 A1B1E1K1 gas filter.
A: It is the short form of A1B1E1K1P3: class 1 protection against organic vapours, inorganic gases, acid gases and ammonia, plus P3 particle filtration.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account

Moldex was founded in California in 1980 and began by making dust masks. Moldex Europe followed five years later. The company makes disposable and reusable FFP masks, half masks with exchangeable filters, and foam earplugs and other hearing protection.
See all Moldex products →