Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Moldex 9032 P3 R EasyLock Particulate Filter with Ozone Protection (Pack of 12)

Moldex 9032 P3 R EasyLock Particulate Filter with Ozone Protection (Pack of 12)

Part no. BW-MOL9032
£83.29£69.41Inc VATEx VAT
£69.41 ex VAT£83.29 inc VAT ·

About this item

  • EasyLock P3 R with ozone protection – 99.95% particle filtration
  • Fits Moldex Series 7000 and 9000 masks, no adapter
  • EN 143 · 12 filters

Product description

The Moldex 9032 is an EasyLock P3 R with ozone protection particle filter for Moldex Series 7000 half masks and Series 9000 full face masks.

It locks straight onto the mask with a bayonet connection – no adapter needed – and can also be clipped onto the front of an EasyLock gas filter as a particle pre-filter.

EasyLock particle filters with bayonet connection can be mounted directly onto the 7000 and 9000 Series mask bodies.

They can also be combined with EasyLock gas filters without an adapter and used as a particle pre-filter. The AirWave long-life pleated filter gives the particle filters extremely low breathing resistance and a particularly high absorption capacity.

Variants with an activated carbon layer offer additional protection against ozone.

Key Features
  • Reliable protection against particles
  • Simple installation process - no adapters needed
  • Pleated filter: low breathing resistance due to large filter surface

Specifications

ManufacturerMoldex
Moldex product number903201
Filter classP3 R
Filtration efficiencyAt least 99.95% (EN 143 P3)
Ozone protectionActivated carbon layer – ozone up to 1,000 ppb for a maximum of 8 hours (Moldex)
Pack contents12 filters
FitsMoldex Series 7000 and Series 9000 masks (EasyLock bayonet)
StandardEN 143:2000+A1:2006
PPE Regulation(EU) 2016/425
Shelf life (from production, stored properly)5 years
Before you use it
  • Get face fit tested for the mask model you use, and be clean shaven where it seals.
  • Seal check it every time you put it on.
  • Change gas filters on the schedule your assessment sets, and straight away if you can smell or taste the contaminant. Change particle filters when breathing becomes harder.
  • Filters don't supply air. Never use a filtering mask in low oxygen or in confined spaces unless the assessment allows it.
  • Store masks and opened filters clean and sealed away from contaminants, and clean the mask after use.
EN 143 particle filters explained

EN 143 classes particle filters by efficiency: P1 at least 80%, P2 at least 94% and P3 at least 99.95%. R means the filter is reusable for more than one shift.

Under HSE guidance HSG53, a half mask with P2 filters has an assigned protection factor of 10 and with P3 filters 20; a full face mask with P3 filters has 40.

Compatible Products and Spares

Documents (1)

View on this page or download.

PDFDeclaration of Conformity
PDF document

Buying guide

Choosing the right filter

Reusable half masks (EN 140) and full face masks (EN 136) protect only when fitted with the right filter. Filters are colour coded by what they stop:

Code Colour Protects against
A Brown Organic gases and vapours with a boiling point above 65 °C, such as many solvents
AX Brown Low-boiling organic vapours (65 °C or below)
B Grey Inorganic gases such as chlorine and hydrogen sulphide
E Yellow Acid gases such as sulphur dioxide
K Green Ammonia and its derivatives
P1, P2, P3 White Dust, mist and fumes (particles), with P3 the most efficient

A gas filter's number (1, 2 or 3) shows its capacity, with 3 the highest. Combined filters, such as A2P3, protect against gases and particles together. Your COSHH assessment and the product's safety data sheet set the filter you need.

Questions and answers

Q: Can I use this with a gas filter?

A: Yes. EasyLock particle filters clip directly onto the front of EasyLock gas filters without an adapter, giving combined gas and particle protection. Moldex sells the 9430 A1B1E1K1P3 as a ready-assembled combination.

Q: How long does the filter last?

A: R-marked filters can be reused for more than one shift. Replace them when breathing becomes noticeably harder, if they are damaged or visibly contaminated, or as your risk assessment requires. Unused filters have a shelf life of 5 years from production when stored properly.

Q: What does the ozone protection do?

A: An activated carbon layer reduces nuisance ozone, for example from welding, at concentrations up to 1,000 ppb for a maximum of 8 hours, according to Moldex.

Have a question about this product?Ask a question

More in Respiratory Protection

View all →