The Raptor manual chain hoist (also called a chain block) lifts and lowers loads by hand, with no power supply needed.
Hang it from a beam clamp, trolley or gantry, pull the hand chain to raise the load, and a disc brake holds it wherever you stop.
There are eight capacities from 500 kg to 20,000 kg, each available with 3, 4, 5, 6, 8 or 10 m of lift. It is supplied with an EC Declaration of Conformity to the Machinery Directive 2006/42/EC. It is part of our hand chain hoist range.
Choose a size above to see its specifications.
| Model | Capacity | Load chain | Falls | Test load | Hand chain effort at rated load | a (mm) | b (mm) | c, headroom (mm) | Net weight (standard lift) | Extra weight per metre of lift |
|---|---|---|---|---|---|---|---|---|---|---|
| MH05 | 500 kg | 6 x 18 mm | 1 | 6.3 kN | 231 N | 131 | 127 | 270 | 10 kg | 1.7 kg |
| MH10 | 1,000 kg | 6 x 18 mm | 1 | 12.5 kN | 309 N | 140 | 158 | 317 | 12 kg | 1.7 kg |
| MH15 | 1,500 kg | 8 x 24 mm | 1 | 18.8 kN | 320 N | 161 | 174 | 399 | 19 kg | 2.3 kg |
| MH20 | 2,000 kg | 8 x 24 mm | 1 | 25 kN | 360 N | 161 | 187 | 414 | 20 kg | 2.3 kg |
| MH30 | 3,000 kg | 8 x 24 mm | 2 | 37.5 kN | 340 N | 161 | 199 | 465 | 27 kg | 3.7 kg |
| MH50 | 5,000 kg | 10 x 30 mm | 2 | 75 kN | 414 N | 186 | 253 | 636 | 45.5 kg | 5.6 kg |
| MH100 | 10,000 kg | 10 x 30 mm | 4 | 125 kN | 414 N | 207 | 398 | 798 | 83 kg | 9.7 kg |
| MH200 | 20,000 kg | 10 x 30 mm | 8 | 250 kN | 828 N | 215 | 650 | 890 | 193 kg | 19.4 kg |
Weights are at the standard lift (2.5 m on the MH05, MH10 and MH15; 3 m on the MH20 to MH200); add the per-metre figure for longer lifts. Dimension c is the closed height from suspension point to hook (headroom); a and b are body dimensions as lettered on the datasheet drawing. Lift heights available: 3, 4, 5, 6, 8 and 10 m. Supplied with an EC Declaration of Conformity (Machinery Directive 2006/42/EC). For the standard the hoist is tested to, ask us to confirm.
The hoist, built to the capacity and lift height you select. If you need a certificate of conformity or test certificate, tell us when you order and we will confirm what can be supplied.
You may also need:
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
The top hook hangs from your anchor point and closes with a safety latch. Pulling the hand chain (the loop of chain you hold) turns a gearbox that winds in the load chain, so a modest pull lifts a much heavier load.
Pull the other side of the loop to lower.
When you let go, the disc brake locks and holds the load in place.
The heavier models use more falls (the number of load chain runs between the hoist body and the bottom hook): 2 on the MH30 and MH50, 4 on the MH100 and 8 on the MH200. More falls share the load, so hand effort stays manageable, but you pull more hand chain for every metre of lift.
Lift height is the distance the hook can travel, so measure from the suspension point down to the lowest point the hook must reach.
Choose the capacity for the heaviest load, then the next lift height up from your measured drop.
A: Measure from the suspension point to the floor, or to the lowest point the hook must reach, and choose the next size up from 3, 4, 5, 6, 8 or 10 m.
A: Extra falls share the load and keep hand effort manageable. The MH30 and MH50 have 2 falls, the MH100 has 4 and the MH200 has 8.
A: Hand chain effort at rated load runs from 231 N on the MH05 to 414 N on the MH50 and MH100, and 828 N on the MH200.
A: Yes. Hang it from a push or geared trolley of at least the same capacity to travel the load along the beam.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
RAPTOR is a range of lifting and material handling equipment. Its products have been available since 1969, and the brand was relaunched in 2008. The range covers hoists, trolleys, clamps, slings, stackers and pallet trucks.
See all Raptor products →