In stock - ready to dispatch
The Warrior WRSLPU10 is a 1,000 kg static lift table with a U-shaped 1,450 x 1,140 mm platform.
The 1,050 x 585 mm cut-out lets a pallet truck drive in, lower the pallet onto the table and pull out again, so pallets go on and off without any lifting by hand.
Mains-powered hydraulics raise it from 80 mm to 760 mm in 18 seconds.
The table runs off a remote power pack, so the motor, hydraulics and controls sit away from the platform where they are easier to reach for maintenance. An emergency check valve holds the platform if hydraulic pressure is lost, and fully interlocked arrestors give mechanical protection during maintenance.
It can be floor mounted, or pit mounted so the platform sits flush with the floor.
View on this page or download.
A: Pit mounting puts the platform flush with the floor so trucks roll straight on; floor mounting is simpler but leaves the lowered height as a step.
A: The U-shape lets a pallet truck leave the pallet on the table; the full-top WRSLPFT10 uses a ramp for trolleys and roll cages.
A: 380 V, 16 A three-phase.
A: No, it is for goods only.
A: As lifting equipment under LOLER it needs a thorough examination at least every 12 months, or as set by a written scheme.