Electric Chain Hoists
STAHL CraneSystems ST series electric chain hoists from 125kg to 5,000kg, for repeated lifting in workshops, factories and production lines. Run them on beam trolleys, or choose hand chain hoists where there is no power supply. Short-term job? Hire an electric hoist by the week.
- Products
- 61
- Brands
- KITO, STAHL +2
- Price from
- £1,198
- Certification
- ✓ UKCA & CE
Electric Chain Hoists
Choosing a STAHL ST electric chain hoist
Every electric chain hoist on this page is from the STAHL CraneSystems ST series, used as stationary hoists, on runway beams and on cranes. The series covers 125kg to 6,300kg across its frame sizes. Choose the frame by capacity first, then by how hard the hoist will work.
| Model | Capacity on this page | Choose it for |
|---|---|---|
| ST05 | 125kg to 500kg | Light, compact lifting at workstations |
| ST10 | 500kg to 1,000kg | General workshop lifting |
| ST20 | 1,000kg to 2,000kg | Medium loads and single-girder cranes |
| ST30 | 1,600kg to 3,200kg | Occasional lifts of heavier loads |
| ST32 | 1,600kg to 3,200kg | The same loads lifted frequently |
| ST50 | 2,500kg to 5,000kg | Heavy loads on cranes and runways |
Duty rating: ST30 or ST32
STAHL rates each ST model to an ISO mechanism group, from M3 to M7. A higher group means the hoist is designed for more running time and more starts per hour. The ST30 and ST32 lift the same loads, so the duty group decides between them. In STAHL's selection tables the ST30 at 1,600kg on one fall, or 3,200kg on two, is group M3. The ST32 at the same capacities is M5. Choose the ST30 for occasional heavy lifts and the ST32 for repetitive work through a shift.
Speeds, falls and controls
The standard ST hoist has a two-speed, pole-changing motor with a 4:1 ratio, such as 8 m/min fast and 2 m/min slow. The slow speed is for setting the load down accurately. Many models are built with one chain fall or two. Two falls double the capacity and halve the lifting speed, so an ST20 that lifts 1,000kg at 8/2 m/min on one fall lifts 2,000kg at 4/1 m/min on two. Frequency inverter control, with a 1:10 speed range, is available as an option.
Control is by a plug-in pendant with emergency stop, rated IP65, running on a 48V control circuit. STAHL also offers radio remote control. Every ST10 to ST60 has a slipping clutch in an oil bath for overload protection, and all have a fully enclosed electromagnetic disc brake.
Power supply
The ST hoists on this page run on a three-phase supply. STAHL's standard ST supply is 380 to 415V, 50Hz. These are not 110V site hoists, so check you have a three-phase socket or isolator where the hoist will hang. STAHL's product information lists a single-phase ST version; ask us if your site has no three-phase supply. If there is no electrical supply at all, or the area is classified as hazardous, look at our pneumatic chain hoists.
Suspension, headroom and LOLER
An ST hoist can hang from a hook or eye, be rigidly mounted, or run on a push or electric trolley. STAHL also builds short headroom and extra short headroom trolleys for low steelwork. For a hook-mounted hoist that needs to travel by hand, pair it with a unit from our trolleys and trolley clamps range, and check the beam flange width before you order.
An electric hoist is lifting equipment under LOLER. It needs a thorough examination at least every 12 months unless a written examination scheme sets other intervals. A hoist installed on a beam or trolley on site needs examining after installation and before first use.
Can I get a 110V electric chain hoist?
The STAHL ST hoists on this page run on a three-phase 380 to 415V supply with a 48V control circuit, so they are not 110V hoists. STAHL lists a single-phase ST version, so ask us if you have no three-phase supply.
What is the difference between the STAHL ST30 and ST32?
They lift the same loads. The ST32 has a higher ISO duty group (M5 against M3 at 1,600kg and 3,200kg), so it suits frequent lifting through a shift.
What does 8/2 m/min mean on an electric hoist?
It is a two-speed hoist: 8 metres per minute at fast speed and 2 metres per minute at slow speed for accurate positioning.
Does an electric chain hoist have overload protection?
Yes. STAHL ST10 to ST60 hoists have a slipping clutch running in an oil bath that stops the hoist lifting a load beyond its rating.
Can an electric chain hoist be fitted to a trolley?
Yes. The ST can hang from a push trolley or run on an electric trolley, and STAHL also builds short and extra short headroom trolleys for low beams.
How often does an electric hoist need a LOLER inspection?
At least every 12 months, unless a written examination scheme sets a different interval. It also needs examining after installation on site and before first use.
Which brands do you stock for Electric Chain Hoists?
What else is in Hoists and Trolleys?
Related ranges include Hand Chain Hoists, Chain Hoist Accessories, Ratchet Lever Hoists, Trolleys & Trolley Clamps, Pneumatic Chain Hoists and Electric Wire Rope Hoists.