Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Hoists and Trolleys

Electric Chain Hoists

STAHL CraneSystems ST series electric chain hoists from 125kg to 5,000kg, for repeated lifting in workshops, factories and production lines. Run them on beam trolleys, or choose hand chain hoists where there is no power supply. Short-term job? Hire an electric hoist by the week.

Products
61
Brands
KITO, STAHL +2
Price from
£1,198
Certification
✓ UKCA & CE
Products 61
Brands KITO, STAHL +2
Price from £1,198
Certification ✓ UKCA & CE
8 productsClear all
Buying guide

Electric Chain Hoists

Choosing a STAHL ST electric chain hoist

Every electric chain hoist on this page is from the STAHL CraneSystems ST series, used as stationary hoists, on runway beams and on cranes. The series covers 125kg to 6,300kg across its frame sizes. Choose the frame by capacity first, then by how hard the hoist will work.

Model Capacity on this page Choose it for
ST05 125kg to 500kg Light, compact lifting at workstations
ST10 500kg to 1,000kg General workshop lifting
ST20 1,000kg to 2,000kg Medium loads and single-girder cranes
ST30 1,600kg to 3,200kg Occasional lifts of heavier loads
ST32 1,600kg to 3,200kg The same loads lifted frequently
ST50 2,500kg to 5,000kg Heavy loads on cranes and runways
Duty rating: ST30 or ST32

STAHL rates each ST model to an ISO mechanism group, from M3 to M7. A higher group means the hoist is designed for more running time and more starts per hour. The ST30 and ST32 lift the same loads, so the duty group decides between them. In STAHL's selection tables the ST30 at 1,600kg on one fall, or 3,200kg on two, is group M3. The ST32 at the same capacities is M5. Choose the ST30 for occasional heavy lifts and the ST32 for repetitive work through a shift.

Speeds, falls and controls

The standard ST hoist has a two-speed, pole-changing motor with a 4:1 ratio, such as 8 m/min fast and 2 m/min slow. The slow speed is for setting the load down accurately. Many models are built with one chain fall or two. Two falls double the capacity and halve the lifting speed, so an ST20 that lifts 1,000kg at 8/2 m/min on one fall lifts 2,000kg at 4/1 m/min on two. Frequency inverter control, with a 1:10 speed range, is available as an option.

Control is by a plug-in pendant with emergency stop, rated IP65, running on a 48V control circuit. STAHL also offers radio remote control. Every ST10 to ST60 has a slipping clutch in an oil bath for overload protection, and all have a fully enclosed electromagnetic disc brake.

Power supply

The ST hoists on this page run on a three-phase supply. STAHL's standard ST supply is 380 to 415V, 50Hz. These are not 110V site hoists, so check you have a three-phase socket or isolator where the hoist will hang. STAHL's product information lists a single-phase ST version; ask us if your site has no three-phase supply. If there is no electrical supply at all, or the area is classified as hazardous, look at our pneumatic chain hoists.

Suspension, headroom and LOLER

An ST hoist can hang from a hook or eye, be rigidly mounted, or run on a push or electric trolley. STAHL also builds short headroom and extra short headroom trolleys for low steelwork. For a hook-mounted hoist that needs to travel by hand, pair it with a unit from our trolleys and trolley clamps range, and check the beam flange width before you order.

An electric hoist is lifting equipment under LOLER. It needs a thorough examination at least every 12 months unless a written examination scheme sets other intervals. A hoist installed on a beam or trolley on site needs examining after installation and before first use.

Common questions
Can I get a 110V electric chain hoist?

The STAHL ST hoists on this page run on a three-phase 380 to 415V supply with a 48V control circuit, so they are not 110V hoists. STAHL lists a single-phase ST version, so ask us if you have no three-phase supply.

What is the difference between the STAHL ST30 and ST32?

They lift the same loads. The ST32 has a higher ISO duty group (M5 against M3 at 1,600kg and 3,200kg), so it suits frequent lifting through a shift.

What does 8/2 m/min mean on an electric hoist?

It is a two-speed hoist: 8 metres per minute at fast speed and 2 metres per minute at slow speed for accurate positioning.

Does an electric chain hoist have overload protection?

Yes. STAHL ST10 to ST60 hoists have a slipping clutch running in an oil bath that stops the hoist lifting a load beyond its rating.

Can an electric chain hoist be fitted to a trolley?

Yes. The ST can hang from a push trolley or run on an electric trolley, and STAHL also builds short and extra short headroom trolleys for low beams.

How often does an electric hoist need a LOLER inspection?

At least every 12 months, unless a written examination scheme sets a different interval. It also needs examining after installation on site and before first use.

Which brands do you stock for Electric Chain Hoists?

We supply Yale, STAHL, CM and KITO. Ranges vary, so check the brand page for the full listing.

What else is in Hoists and Trolleys?