The 2 Tonne Round Sling is an endless-loop lifting sling made from continuous strands of high-tenacity polyester yarn in a colour-coded tubular woven sleeve, manufactured to BS EN 1492-2:2000. The green-coded sling provides a Working Load Limit of 2,000 kg in a straight lift, rising to 4,000 kg in a basket hitch, and flexes in any direction to conform to cylindrical, curved and irregular loads. The protective sleeve shields the core from abrasion and UV degradation; available in effective working lengths from 1m to 6m.
Key Features
- Manufactured to BS EN 1492-2:2000 - produced from 100% high-tenacity polyester, tested and certified to the European harmonised standard for textile round slings
- Endless loop construction - continuous polyester yarn core inside a protective tubular sleeve provides exceptional strength with multi-directional flexibility
- Green colour-coded for 2 Tonne WLL - instant visual identification of Working Load Limit in accordance with the international colour standard
- Protective tubular sleeve - the outer woven polyester cover protects the load-bearing core from abrasion, cuts, UV degradation, and contamination while remaining soft against the load
- 4,000 kg capacity in basket hitch - in a basket configuration the effective WLL doubles, providing significant versatility for heavier loads
- 7:1 safety factor - minimum core breaking strength of 14,000 kg, with the outer sleeve rated to withstand at least twice the WLL before rupture
- Conforms to any load shape - the tubular construction flexes in any direction, naturally wrapping around cylindrical, curved, and irregularly shaped loads for a secure grip
- Superior choke performance - forms a tighter, more even choke hitch than flat webbing slings, particularly effective on pipes, drums, and cylindrical loads
- Lightweight and easy to handle - significantly lighter than chain or wire rope slings of equivalent capacity, reducing manual handling strain during rigging
- Blue identification label - individually serialised with WLL, EWL, mode factors, and manufacturer details for full LOLER traceability
Technical Specifications
| Specification |
Value |
| Working Load Limit (WLL) |
2,000 kg (2 Tonne) |
| Colour Code |
Green |
| Construction |
Endless loop - polyester core in tubular sleeve |
| Core Material |
100% high-tenacity polyester yarn |
| Sleeve Material |
Woven polyester tubular cover |
| Safety Factor |
7:1 |
| Minimum Breaking Strength |
14,000 kg |
| Temperature Range |
-40°C to +100°C |
| Standard |
BS EN 1492-2:2000 |
| Directive |
Machinery Directive 2006/42/EEC |
| Available Lengths (EWL) |
1m, 2m, 3m, 4m, 5m, 6m |
CE Marked, UKCA Compliant & BS EN 1492-2 Certified
This product is CE marked in accordance with EU Machinery Directive 2006/42/EEC and is UKCA compliant for the Great Britain market. Manufactured to the performance requirements of BS EN 1492-2:2000 with a 7:1 safety factor - the minimum breaking strength of the core is seven times the stated Working Load Limit, and the outer sleeve must not rupture below twice the WLL. Each sling is individually serialised and supplied with full traceability documentation including an EC Declaration of Conformity. Following Brexit, the UK government has confirmed indefinite recognition of CE marking for lifting equipment in Great Britain.
More About This Product
2 Tonne Round Sling is an endless-loop lifting sling constructed from continuous strands of high-tenacity polyester yarn encased in a durable, colour-coded tubular woven polyester sleeve. Manufactured to BS EN 1492-2:2000, the green-coded sling provides a Working Load Limit of 2,000 kg in a straight lift - rising to 4,000 kg in a basket hitch configuration. The endless tubular construction allows the sling to flex in any direction, conforming naturally to cylindrical, curved, and irregularly shaped loads. The protective outer sleeve shields the load-bearing polyester core from abrasion, UV degradation, and surface damage, while the soft material protects the load from scratching and marking. Green colour-coded for instant WLL identification in accordance with the international colour standard. Each sling is individually serialised with a blue identification label. Available in effective working lengths (EWL) from 1m to 6m.
Common Round Sling Rigging Methods
- Straight lift (vertical) - pass the round sling through or around the load and place both eyes (or both halves of the endless loop) onto the crane hook. Uses the full 2,000 kg WLL. The simplest and most efficient configuration.
- Choke hitch - pass one end of the sling through the other to form a noose around the load, then attach the free end to the hook. WLL reduces to 1,600 kg. Position the choke point at the natural 120° angle for the most secure grip.
- Basket hitch - pass the sling under the load with both ends on the hook. WLL doubles to 4,000 kg. The load must be balanced and both legs must bear equal weight. The round sling's tubular construction sits well in basket configuration.
- Double-wrap choke - for extra security on cylindrical loads, wrap the sling around the load twice before forming the choke. This increases grip significantly but reduces the effective working length. Check the mode factor before use.
- Cow hitch - pass the sling through a lifting point (such as an eye bolt) by threading one bight through the other. This provides a secure attachment that won't slip off the fitting. Useful for connecting to crane hooks, shackles, and master links.
- Girth hitch on shackle - loop the round sling through a shackle for a semi-permanent attachment to a lifting beam or spreader. Ensure the shackle pin is properly tightened and wired to prevent loosening.
Certification and Compliance
This product is CE marked in accordance with EU Machinery Directive 2006/42/EEC and is UKCA compliant for the Great Britain market. Manufactured to the performance requirements of BS EN 1492-2:2000 - the European harmonised standard for textile round slings used in general purpose lifting operations. Each sling is produced with a 7:1 safety factor, individually serialised, and supplied with full traceability documentation including an EC Declaration of Conformity. All lifting equipment used on UK construction sites must comply with the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) and the Provision and Use of Work Equipment Regulations 1998 (PUWER).
Safety Information
- Never exceed the rated Working Load Limit (WLL) for the selected hitch configuration. A choke hitch reduces the WLL to 1,600 kg.
- Inspect the sling before every use. Check the outer sleeve for cuts, tears, abrasion, and holes. If the inner core yarns are exposed, remove from service immediately.
- Do not use round slings on sharp-edged loads without protective wear sleeves - sharp edges can cut through the outer sleeve and damage the core.
- Do not knot or twist the sling to shorten it. Knotting damages the core yarns and dramatically reduces the WLL.
- Position the choke point at the natural 120° angle. Forcing a tighter choke generates friction that can damage the sleeve and reduce capacity.
- Do not expose polyester round slings to strong alkalis, concentrated acids, or temperatures above 100°C.
- Never stand under a suspended load. Maintain exclusion zones during all lifting operations.
- A risk assessment must be in place before any lifting operation. Operation only by competent persons trained in sling use and rigging techniques.
Sling type is chosen by what the load will do to it: chain tolerates heat and sharp edges, webbing is lighter and kinder to finished surfaces. Rated capacity assumes the angle on the tag — see also shackles and chain and fittings for the connections.
Inspection and Maintenance
Round slings must be visually inspected before each use and undergo a thorough examination at least every six months by a competent person under LOLER 1998. Inspection must cover the full circumference of the outer sleeve on all sides, paying particular attention to bearing points where the sling contacts the load. Key indicators of damage include: cuts, tears, or holes in the outer sleeve; exposed core yarns; lumps, hard spots, or unevenness in the core; abrasion wear or thinning of the sleeve; discolouration from chemical or heat exposure; and damage to or illegibility of the identification label. Any round sling showing signs of damage must be removed from service immediately. Round slings cannot be field-repaired - damaged slings must be cut and disposed of to prevent re-use.
Frequently Asked Questions
Q: What does EWL mean and how does it relate to circumference?
EWL stands for Effective Working Length - the usable length of the sling when laid flat. Because a round sling is an endless loop, the EWL is exactly half the total circumference. For example, a 3m EWL round sling has a 6m total circumference. All sizes listed on this page are EWL measurements. The circumference shown on the sling's identification label will be double the EWL you select.
Q: What colour is a 2 tonne round sling?
Green. The colour coding under BS EN 1492-2 matches the duplex sling system - green always indicates 2 tonne WLL, allowing instant identification across both sling types.
Q: What is the basket hitch capacity?
In a basket hitch, the effective WLL doubles to 4,000 kg. Pass the sling under the load with both bights on the crane hook. The load must be balanced and both legs must bear equal weight.
Q: How do round slings differ from duplex webbing slings?
Round slings are endless loops of polyester yarn inside a tubular sleeve. They flex in any direction and form tighter choke hitches. Duplex slings are two flat layers of woven webbing - they provide a wider, flatter bearing surface for flat-sided loads. Both types are manufactured from polyester and carry the same colour coding.
Q: Can I use round slings with overhead cranes?
Yes. Round slings are widely used with overhead cranes, gantry cranes, and hoists. Their lightweight, flexible construction makes them easy to rig in repetitive production line operations, and the soft material protects finished products.
Q: What does the blue label on a round sling mean?
The blue label identifies the sling material as polyester (under BS EN 1492-2, polyester = blue label, polyamide/nylon = green label, polypropylene = brown label). The label also displays the WLL, serial number, EWL, mode factors, and manufacturer details.
Q: How should round slings be stored?
Store round slings hung on a rack or laid flat in a clean, dry container, away from direct sunlight, heat sources, and chemicals. Never leave on the ground where they can be driven over or contaminated.
Q: Can round slings be used for pipe lifting?
Yes - round slings are the preferred choice for lifting pipes, tubes, and cylindrical objects. The tubular construction wraps naturally around curved surfaces, providing a secure grip without the flat edges that can cause duplex slings to bunch or roll.
Q: What is the choke hitch mode factor?
In a choke hitch, the WLL reduces to 1,600 kg (80% of the straight lift WLL). Position the choke point at the natural 120° angle for the most secure grip. Forcing a tighter choke generates friction that can damage the sleeve.
