The Conquip Fixed Flush Cantideck in 4500mm width is the largest Fixed Flush variant, providing 4000mm of clear internal width for the most demanding modular and prefabricated loadout requirements — oversized pods, large façade modules, prefabricated MEP risers and structural panel assemblies that exceed the capacity of smaller widths. The single-prop design suspends the deck from the base of the main load-bearing beam, preserving the flush floor-to-deck transition that defines the Fixed Flush family.
Key Features
- 4000mm clear internal width — largest in the Fixed Flush range
- Suits oversized pods, large façade modules and prefabricated MEP assemblies
- True flush transition between building floor and deck
- Single-prop design reduces deck weight and reaction loadings on the structure
- 5000kg UDL working load limit (subject to slab verification)
Technical Specifications
| Product Code |
FF45 |
| Total Length |
8000mm |
| Outboard Length |
4000mm |
| External Width |
4500mm |
| Internal Width |
4000mm |
| Weight |
2800kg |
| Working Load Limit |
5000kg UDL (Uniformly Distributed Load) |
| Lifting Points |
4 |
| Standards |
BS EN 13155 |
| Compliance |
LOLER 1998, PUWER 1998 |
Cantideck platforms load from the building edge without external scaffold support, and depend on correct counterweighting. For loads craned in from ground level see goods cages and lifting beams.
5000kg UDL | LOLER 1998 compliant | CE-marked | UK Manufactured
Single-prop installation in approximately 30 minutes by Conquip-trained operatives or by Conquip's installation team. Site Surveyor must verify slab strength and de-rate as required.
Suitable Applications
The 4500mm Fixed Flush Cantideck is specified where standard pod and panel widths exceed 3000mm — including large prefabricated MEP risers, oversized hotel and residential pods, and large-format façade unitisation. Where the project also requires retractable deck capability for stacked multi-floor logistics, see the Super Roller Cantideck range.